Revtek KIT 431 For FJ Cruiser

Fx Enhancements · 04-15-2006, 10:47 PM

Just finished puting on a revtek kit (431) on my FJ. Had very little problems. The kit was made for a 4Runner SR5/SPORT 4WD. I DID NOT HAVE TO MODIFY ANYTHING! THIS KIT WORKED GREAT! Here are some pictures of the install

Fx Enhancements · 04-15-2006, 10:48 PM

Fx Enhancements · 04-15-2006, 11:00 PM

Other Quick notes:
1st Make Sure you have a good set of spring compressors. (I Didn’t)
2nd Be careful of the back nut on the Strut tower because it strips very easy and is hard to get to.
3rd On the top of the shocks on the rear is very hard to get tools in and the bottom the shock is very close to the axel all most rubs. see pictures!

**etp095** · 04-15-2006, 11:00 PM

very nice setup,all you need now are some stouter tires huh.

**etp095** · 04-15-2006, 11:04 PM

Quote:

etp095 previously said:

very nice setup,all you need now are some stouter tires huh.

what tires are you planing to install?could you post the new vehicle height.

JimmyHoops · 04-15-2006, 11:05 PM

Quote:

Fx Enhancements previously said:

Other Quick notes:
1st Make Sure you have a good set of spring compressors. (I Didn’t)
2nd Be careful of the back nut on the Strut tower because it strips very easy and is hard to get to.
3rd On the top of the shocks on the rear is very hard to get tools in and the bottom the shock is very close to the axel all most rubs. see pictures!

How is the ride? Does it perform the same on pavement and at highway speeds? Please post some results. Looks cool though. Do you have any plans on bigger tires? If so, what size?

~Jimmy

Fx Enhancements · 04-15-2006, 11:18 PM

I'd like to put some BF Goodrich Krawler T/A we will see if thay fit!? Still Drives Great very little sway. 0-60 in 7.2 sec........The new vehicle height 75.8

Tranman · 04-15-2006, 11:29 PM

Nice work. Great pics. I think I'd the same set up. Was wondering if I would be able to keep my alloys after the lift and just get bigger tires. That would same me some $ if I didn't have to buy new rims as well. Will you be keeping your 17" alloys?

Fx Enhancements · 04-15-2006, 11:33 PM

Yeah i'll keep the for the road/highway and get a set of steel rims to beat up.

Fx Enhancements · 04-15-2006, 11:35 PM

Oh yeah the Lift kit only cost $488.00 $512.00 shiped!