MissFJ's Project SFA - Page 23

sbechtold · 07-13-2007, 05:15 PM

Looking good! There's plenty of room left...

I assume this is at full bump and if the tire were mounted it would be into the fender pretty good, so no worries about losing any up-travel based on the steering box hitting the tie rod. The axle looks like it's been moved WAY forward. How far did you move it?

Quote:

Sillyneck previously said:

Let's see if it worked.

there's a few pics showing full compression.... so if it looks like something is hitting, it's probably right there.

bandi · 07-13-2007, 05:19 PM

Coming together very nicely thar' !!!... Thanks
for the update...

Sillyneck · 07-13-2007, 05:21 PM

yea that's wicked stuffed. it'll ride 4-5" higher than that depending on how much fender I can cut before amanda shows up LOL

the pictures I just posted w/ the tire on it is ride height... I'm not sure how far forward I went... it kinda went like this

tim "hey phil... I think we're going to need to cut that body mount"

me "ummmm *scrappppppeeeeeeeee* not w/ the axle all the way up here we're not"

there's 2 feet from axle center to the body mount on the driver's side if that gives any perspective.

sbechtold · 07-13-2007, 05:42 PM

LOL! She's gone for a few more days, so I say let the fender cutting begin.

**MissFJ** · 07-14-2007, 04:58 PM

I see you!

a) What no more boobie pics?

b) I thought we agreed white wheels!

c) Looks good from my puter screen just don't touch my fender!!

sbechtold · 07-14-2007, 05:00 PM

Quote:

MissFJ previously said:

c) Looks good from my puter screen just don't touch my fender!!

I think it's too late...

Sillyneck · 07-14-2007, 05:56 PM

Quote:

sbechtold previously said:

I think it's too late...

[mad scientist voice]Muahahahahahhahahahahhahahah[/mad scientist voice]

**MissFJ** · 07-16-2007, 01:42 PM

Quote:

sbechtold previously said:

I think it's too late...

Hey now, don't you have your own project to finish, instigator

Sillyneck · 07-16-2007, 03:08 PM

ar·tic·u·la·tion (är-tik'ye-la' shen) "A fixed or movable joint between an axle and the body (of the rig eh).
A movable joint between inflexible parts of the rig's body and it's axles, as the divisions of an appendage in arthropods. (for good measure we'll keep that) "

no bind yet.... we just didn't go any further because I didn't want to pick pieces of fjcruiser off the floor if it fell off the rack. Tim was all for it though

**MissFJ** · 07-16-2007, 03:14 PM

Good gawd! We don't need no stinkin springs!

Edit: BTW, Tim's really short, could you get a different comparison