ARB Safari Snorkel Install Instructions w/ Pics - Page 4

***Shadow-Warrior*** · 10-01-2007, 07:44 AM

Quote:

makaser previously said:

So, for going snorkeling in my FJ, is there anything else I will need besides the snorkel? Are all the other components already water tight? Computer modules, etc?

Yes, if you haven't already relocated your rear Diff & Locker breathers. You will need to do this also, here is a link on how to do it.

http://www.fjcruiserforums.com/forum...ather-mod.html

makaser · 10-01-2007, 10:41 AM

Sweet, thank you sir!

***Shadow-Warrior*** · 10-01-2007, 10:47 AM

Your Welcome

XeNoN40 · 10-03-2007, 04:14 PM

Shadow-Warrior, that black box that is under the back of the FJ, is that water proof?

***Shadow-Warrior*** · 10-05-2007, 08:50 AM

I would have to say it is, Toyota says the vehicle can go up to 27" of water, that is way below 27", so yes, it is water proof.

ftmyersTRD · 10-05-2007, 09:38 AM

Is there any other way to connect the snorkel without having to cut the panel. That is my only worry, having to cut and drill that panel.

***Shadow-Warrior*** · 10-05-2007, 09:57 AM

Nope, yeh have to do it with all Snorkel's sorry, no other way. It hurt's only for a minute or two

***Shadow-Warrior*** · 10-05-2007, 09:59 AM

At the moment I'm working on how to adapt it to the CAI's. It looks like it's going to be a little bit of a challenge

bandi · 10-05-2007, 10:31 AM

Quote:

ftmyersTRD previously said:

Is there any other way to connect the snorkel without having to cut the panel. That is my only worry, having to cut and drill that panel.

Look at it this way, the inner fender panel has
a hole in it already, so you are good there, and
the outer fender is where you would need to put
a hole, but it also gets reinforced with square
pattern of four bolts from the ARB kit...

**volhoo** · 10-05-2007, 11:19 AM

I want my snorkel.