Desert Armor Pre-Orders:

Pumbaa · 10-08-2007, 05:30 PM

OK it is official we are taking pre-orders for the Front Bumper:

Left, non-winch Bumper. Right, Winch Mount Bumper.

We will start taking actual orders starting October 15th and will start making the non-winch Bumper as soon as the orders come in. A date for the Winch Mount Bumper as not been set as of yet, because the winch mount itself is outsourced and are currently in production. If you are interested in the Winch Mount please still post up so we have a general idea as to how much material we will need.

NOTE: These Bumpers will be ‘Custom Made to Order’ so there is no stock on them. Once an order has been placed the bumper will be made to your specifications. Turn around time will be 1 (one) week plus shipping time.
(Please realize that this is a very small shop and the turn around time may vary depending on how many bumpers are ordered)

Construction:
-The Bumper is made out of 1.75” .12” wall DOM Steel Tubing.
-Mounting Plates are made of 1/4” Steel Plates.
-Lower Radiator Protection is made of 1/8” Steel Diamond Plating.
-Radiator Grill is made of 1/8” Steel Diamond Grading.
-The ends of the Main bar are plugged with plastic cabs so that they are easily removable for wiring access.

Options:
-The Frame of the Bumper cannot be changed except for the angle of the Bull Bar.
-The Plating protecting the radiator can be changed to your specification at an additional cost.
-You have 5 options of light mount configurations to choose from that are included in the price.
-The Bumper will come unfinished. We can take it to LineX at an additional cost.
(Prices from LineX will be up soon)

Winch Mount Bumper:

Non-winch Bumper: $700
Winch Mount Bumper: $800
(Both Bumpers includes Light Mounts and Radiator Protecting Plates as seen in Pictures. Does not have Paint or coding, will come Unfinished)

Shipping cost will vary.
(A general idea of the shipping cost will be posted soon)

Installation Note:
-The only cutting that needs to be done is on the plastic inner fender cover that can easily be done with a razor blade.

Pumbaa · 10-08-2007, 05:32 PM

Pictures:

thugasaur · 10-08-2007, 05:44 PM

i just had a crazy idea but might be cool...

the arb bumper has the holes for adding the small antennas as a width marker on both ends could this be done on a custom basis?

Pumbaa · 10-08-2007, 05:46 PM

Quote:

thugasaur previously said:

i just had a crazy idea but might be cool...

the arb bumper has the holes for adding the small antennas as a width marker on both ends could this be done on a custom basis?

Yes, things like this can be added for an additional cost.

thugasaur · 10-08-2007, 05:48 PM

cool is this the cost full time or a intorductory price i dont have 800 bucks yet lol

WZRDofAZ · 10-09-2007, 01:45 PM

Quote:

thugasaur previously said:

cool is this the cost full time or a intorductory price i dont have 800 bucks yet lol

x2

I'm wondering if I should buy now for a better price, or wait 4-5 months till I have the truck.

Pumbaa · 10-09-2007, 08:54 PM

This is the price for now and it will stay at this unless there are so many orders coming in to justify a higher price.

targa88 · 10-09-2007, 10:18 PM

Pumbaa,
You have my attention - when so the pre orders for the winch model begin?

thugasaur · 10-09-2007, 10:40 PM

dan you and your friend are good folks designing this for us fj junkies

edit: i was wondering is the light hoop able to have wire run inside of it for the lights?

mbarroso12 · 10-09-2007, 11:40 PM

where in AZ are those pics?