4x4 / Off-Road TechThis section contains all discussion related to taking the FJ Cruiser in Off-Road situations, 4x4 applications and any armor modifications.
Graham(GSGMAC) I think your FJ should have its own thread dedicated to it since its been branched out into other threads. We intalled this lift kit yesterday and perfected it today. The install went pretty smooth the only problem we ran into was "clocking" the lower strut base plate properlly which we did today with no problem we had the entire front suspension off and reinstalled within a couple of minutes. Below you will see the picture of what our problem was, we had the bottom strut plate clocked wrong therefor it was causing rubbing on the sway bar. The red is where it was rubbing and the blue line is where the indention on the lower plate should be for maximum clearance. On both sides the indention should face towards the in side of the engine bay.
Here are a couple of pics I took
Sorry again for the size im waiting to see if maybe graham can resize them I dont have a program to do it. This is GSGMAC(graham) Fj. I did the install for him looks like parts total would be around $700
OME884 Coils Front $128.00
OMEN140S Front Struts $237.00
OME95PF5 Trim Packer for L/Front $8.00
OME895 Rear Springs $128.00
OMEN71E Rear Shocks $148.00
Parts Available at Toyota of Dallas they are a supporting vendor here.
I can do a step by step write up on my next install we were just in a little of a time crunch we only had 2.5 hrs to do the front and rear and alignment.
Yes I was pretty excited about this kit but what was more exciting was riding in it through all the contruction,thanks again graham for being patient and for the free ride
Linear Mode
