I love wheeling in my rigs, but I don't do anything too hardcore where the stock set up can't handle it. I have been reading and reading and searching and searching and finally came up with the following set up. I would like other people's input if this would be a good set up or if you think it wouldn't work. It is still not finalized if this is what I am going to do to my Black Diamond but here it goes...
16" American Racing Wheels: Teflon Victors
265/75/16R - MTR Wranglers or Mickey Thompsons MTZ
Expedition One Front Bumper - (105lbs) or an ARB - (150lbs)
Warn M8000 Winch - (75lbs)
Total: (180lbs) to (225lbs)
(Edited)
Front springs to level out the FJ with the bumper/winch combo on. But which ones?
(Edited)
An OME Heavy would not be out of the question but a buddy of mine has that set up with the ARB/Warn M8000 and it sags pretty bad. He's had it for a while and it looks like it settled a lot. I guess I could add some spacers to the front to compensate. However, there are other reasons I might not go with a full 3" lift. So I am just looking at suggestions regarding leveling my rig. Thanks for all the input in advance! Alan
