Custom
DO sliders
I was talking to Jason at the Pomona Off Road Expo last October while standing next to Sol's rig. I was thinking about upgrading my OEM sliders and Jason mentioned that he wanted to try something different on the hybrid sliders. He thought it would look and function better if the four supports' bottom welds are not located at the corner of the square tubing. So, I ordered a pair of custom sliders. They came back today from the powdercoater and Jack and Daniel had them installed in about 20 minutes.
Production DO sliders. Supports' welds are right at the corner of the square tube.
Custom DO sliders. The supports are notched and the welds are on the flat of the square tube.
Custom DO sliders. Top view shows notched supports.
Jack and Daniel installing the sliders.
Jack, thanks again for making these sliders and installing them today.
