|
Re: JBA Headers and/or Exhaust Group BUY!!!
The JBA performance exhaust is a pretty quick install, with nothing special. Midas did mine for free, since the headers were a bigger job with 5-6 hours of work relating to cutting the catbacks off and attaching them to the new headers. If you don't have a good welder do that, you're going to get some very annoying exhaust leaks pretty quickly.
Last week at 20 below zero (* F), running regular 87 gas on flat, dry ground, I clocked a 0-60 of about 6.75 seconds. Premium gas gets a big boost on this system so I'll be trying that when I get the throttle body spacers installed.
With carbon deposits over time, the drone has backed down to a tolerable level that I don't notice too much anymore. I'm installing the throttle body spacers this weekend possibly.
__________________
The Dude abides.
|
