OK
Here the equipment I have.
Infinty Kappa 255a amp (5ch).
Looking to get 50x4 and 300x1 (will be getting Infinity Kappa 6.5 componets for the front and unsure for the rear right now. Any sugestions?)
Spec sheet
http://manuals.harman.com/INF/CAR/Owner's%20Manual/KAPPA%20255A%20om.pdf
And an old school (I have TWO but looking to use only ONE-Brand New Old Stock) Alpine ZR10 (Dual Voice coil) Sub woofer.
It's the SWR 254d
I really would like to run this sub because it is one of the smallest box requirment sub. I want the sub box to hug as close as possible to the rear Fj panels.
Spec sheet (the top is for 12" the bottom is the 10" version)
http://narbi.free.fr/manuels/HP%20-%...b_SWR-304D.pdf
Now here is my questions.
Q#1 What size box would be best for this sub?
Is it still .46ft3 size box?
(I had this sub in my last last(two cars ago) car. One SINGLE voice coil SWR-254E 10" sub in a .46ft3 MDF box with an Infinty amp pusing 300RMS and maxes out at 1000w in a Hatchback. I loved the way it hit (nice and sharp.)
Q#2 Can I run the sub at 4ohms to power the speakers and 2ohms for the sub? To get 50x4(at 4ohms) and the sub at 300x1(2ohms)
Q#3 According to the amp manual. How would I hook up the DUAL VOICE Coil sub to get the 300x1.
Is it AMP#1 POSITVE and AMP#2 NEGATIVE.
The Amp + to Sub +&+ (the two sub terminals)
And AMP - to Sub -&- (the two sub termnals)
Q#3 Who has/can make a custom box to my spec?
I know WICK CAS boxes are designed for JL, what what's this the spec for those boxes? Again I am only looking to run ONE 10" sub.
