This thing is too much fun!!
Mod's:
Expedition one front bumper
Light Racing UCA's
Toytec adjustable coilovers
OME 895's
Swapped out 17' Alloys for Stock Steelies
Hankook 285/70R'17 RT03's
Bandi Mount
Cobra 75wxst
3' Firestick tuneable antenna
Highlift mounts off Ebay (the
Added OEM tow hitch
Scuba Driver mod
Trail Gear Sliders
And the FJ Cruiser Forums sticker For cool points
The Lift:
It took a buddy and myself about 4 hours mostly driven by anticipation. I think it turned out pretty well and the install wasn't all that hard to do considering I never installed a lift before. I used some of the install directions on this forum that were very well put together. I went with the OME mediums all the way around with 285/70R17 Hankook Dynapro RT03's. I am greatly pleased with the results!!
Before:
After:
Before:
After with the Trail Gear rock sliders installed:
Update 11/20/2009: The OME 885 were great for a while, but I wanted something adjustable. Toytec make a great affordable adjustable coilover.
My homemade radiator protection. Just a little security from hidden debris. This will get me by until I can afford some real skids.
And now for my favorite. My Scuba Driver mod. I followed Shadow-Warriors write up for this here
SCUBA Driver Transmission, Transfer Case, Rear Differential & E-Locker Breather MOD
I placed mine on the passenger side and fabricated a bracket to accommodate three spectre filters.
Updated 10/27/2008: Picked up some steelies for 150 bucks with the stock Bridgestones on Craigslist. I mounted my Hanny's on them:
Added the Bandi mount, 3' firestick, and Cobra75wxst:
Update 11/20/2009: Finally got around to getting my hands on an Expedition One front bumper.
See ya!!
