|
Re: The Old Man Emu (OME) Options Guide
Quote:
F.E.A.R. previously said:
What is up with this? The kit says "Typical lift 2"" so how are people getting 2.5-3.0" lifts out of it?
|
"Typical lift 2" " assumes a 4wd with an ARB or other aftermarket bumper and winch. However if stock bumper is used one might get 2.5" with a 4wd. If one has a 2wd(like I do) they might get 3" of lift with a stock bumper. I now have an aftermarket tube bumper and a winch, so My lift has gone from 3" to 2.75" and might sag to 2.5 " over time. Also a pair of unloaded 886's will get a 4wd close to 3" of lift.
Hope this helps. I'm sure others will have something to add. 
__________________
SF, A/T, Conv Pac,Aeroflow HLC's, Demello sliders, Demello Skid plate, OME 2" lift, BFG A/T, K&N filter, Magnaflow exhaust, KC 100 watt and 130 watt slim lights, Two tone air horn,Demello prerunner bumper, rear tow hitch,Allpro LCA's and Skids, Mile marker PE8000 winch, Amsteel blue winch rope, Delrin fairlead rollers, Demello 2wd tranny skid.
Treadlightly member.
|
