Quote:
SVTim previously said:
I've never done this, so if I am wrong, somebody correct me.
I think you need to removed the drive shaft from the propeller shaft, there are 4 bolts. Then slide the drive shaft out, clean up the mess, reassemble. Torque the 4 propeller shaft bolts to 65 lbs/ft. Put 3 or 4 pumps of grease in there.
|
Yeah, that's what I was thinking I was going to try tonight. Before I started I was kind of wondering how hard it was going to be to slip the drive shaft and propeller shaft apart or if they literally just slip apart and back together (there's plenty of grease in there now, haha). Geeze, I feel like a moron.
