|
Re: Installed SAW Hybrid Kit
Quote:
DC Cruiser previously said:
Thanks guys. Installed my Rasta Ally skids tonight. Ran into a small issue with the stabilizer bar rubbing the bolts that hold on the front scoop in the skid. With the SAW stablizer blocks installed in drops the bar just enough to rub the bolts. It was dark so will have to check in the AM to see what I can do.
|
I learned to apply this liberally to the affected area of my sway bar after installing my Camburg coilovers: Image of Grinder - Photobucket - Video and Image Hosting sway bar and springs squeak on contact, hit the sway bar with the grinder per Mark Hawley, BAM! no more squeak.
__________________
2007 TOYOTA FJ Cruiser - Black Cherry Pearl with pinstripes
Done - K&N drop in, rear window mod, Hella FF's,
Demello Offroad hybrid sliders, Camburg coilovers - (700 lb./inch Eibach springs), OME 895E/N141 rear, CB/Bandi-mount, BFG MT 255/75 on 2nd set of alloys, Scuba Squad Mod all four breathers (AT5), front-to-rear mud flap swap
Fresh off UPS truck - DO skid plate
Last edited by FJ's FJ : 04-29-2008 at 11:12 AM.
Reason: Change photo link again.
|
