|
Re: Homemade rear lower arm
I made my own out of 2"x2"x3/16 tube, was super easy you want to be pretty close on length, do one at a time and use the other to measure. 2"x2" tube weights 4.32 lbs per foot, each is roughly 2', Your looking at under 20lbs. total, you will not notice that.
good luck,
__________________
Location: Connecticut
Rig:
2007 SunFusion FJ fully loaded
Mods:
6" Rough Country lift, 1.25" wheel spacers, 305/70/17 Maxxis Bighorn radials, AllPro sliders, Body mount chop, Scuba Driver, Metal Tech front bumper w/ PIAA Lights, Warn M8000, custom rear control arms & skids, All-pro upper a-arms, Over the top skids, Powertank air & homemade tube doors.
TLCA member 18300
Northeast Toyota Crawlers
Yankee Toys
Eastern 4 Wheelers
|
