|
Re: 6x9
Quote:
football751 previously said:
I have the rear pillar speakers, so that shouldn't be an issue. I know the stock deck just has simple line-level outs. I know I could get a deck for cheap, but when I do get a new one I want a nice one
See you used infinities, what alpine amp did you use and did you wire the dash and door speakers into the amp together? Also, did you use 6.5" coax or component speakers in back, and how hard was it to mod the panels and run the wiring for the speakers back there?
|
I'm using an Alpine 4-Channel (MRP-F450) to the 6x9's and 6.5"s. Wicked CAS (supporting vendor) offers the panels for that mod. Make sure you wire directly from the deck to the dash, otherwise you're gonna be pushing way too much power to the dash. When I originally installed the 4 channel I didn't realize that the doors and dash are wired together in the harness and you have to separate them. I did coax speakers all around because the infinity Kappas have their own crossovers for every speaker and it really balances out. Also using the Rockford 325.1 with a DVC P2. I'm very happy with it.
__________________
'08 Ti PreRunner
Outside -Demello Bumper w/ Acro Lights, BFG AT 285's, Fox 2.0 Front & Rear, AP Rear Links (upper and lower) roof rack, Tundra Door Handles, AFE CAI (TBS will be installed when I get ahold of a torque wrench) JBA Exhaust, 8K HID's, Demello Tube Sliders, vent shades
Inside - AVIC D3 w/ Bluetooth, Sirius, and iPod, Infinity Kappa 3.5", 6x9", 6.5", 4" Rockford Sub, Rockford Mono Amp, Alpine 4-Channel, Door Sill Enhancements, Viper 5900 Alarm w/ remote start, Tuffy center console, Midland CB, Wet Okoles
Next - Winch, UCA's CB Mount
|