We have finally completed the Fuel Can Holders or Jerry Can Holders. Our delay was due to the latching mechanism that we tried and did not like until one of our engineers (Charlie) came out with a solution that meets our criteria and also the Patent paperwork.
The frame is made of 1/8” steel, MIG welded together for a solid foundation, it attaches to the floor of ANY of our racks (including the EXP Roof Top Tent Version) with 4 1/8” steel feet that bolt together (see attached picture)
When the Gas cans are removed the frame is the only thing left on the rack.
We took the pictures on a Mule rack (our smallest 39”wide x 48”long x 6” tall) see attached picture:
The cover of the fuel cans was design to prevent somebody from opening your fuel cans and steeling your gas and YES you can use a lock.
We have tested this product under offroad conditions with no vibration or noise what so ever, it is solid and the finish on the metal is Zinc undercoating with black powder coating.
The fuel cans use for these pictures are:
Blitz Jerry Can has 5 gallon capacity and is approved by the Department of Transportation. Dimensions: 13l x 6-1/2w x 18-1/2h
The price for the dual fuel can holder is $97.00 plus shipping (approximately $18.00), as we always due with new products we will do a group buy for 10 at $80.00 plus shipping, please e-mail your request to sales@bajarack.com
We will come out with a single fuel can holder in the near future.
Cheers
Sergio Murillo
BajaRack Adventure Equipment a Division of:
CCM Assembly & Manufacturing, Inc.
2598 Fortune Way
Suite E, Vista CA 92081
Phone: (760) 621-0171
Fax: (760) 539-9960
Nextel: 125*172789*1
e-mail: smurillo@bajarack.com
web site: :: Baja Rack ::
Good question, what is the spacing between the cross members?
Sergio Murillo
BajaRack Adventure Equipment a Division of:
CCM Assembly & Manufacturing, Inc.
2598 Fortune Way
Suite E, Vista CA 92081
Phone: (760) 621-0171
Fax: (760) 539-9960
Nextel: 125*172789*1
e-mail: smurillo@bajarack.com
web site: :: Baja Rack ::
layonnn, we have not fitted the scepter and wedco fuel cans, I will order a couple just to make sure.
Just from looking at the pictures, it would seem that the Wedco's would fit, and the scepters would be a maybe, due to the wide mouth of the Scepters. If i was closer, i'd let you borrow a couple of mine, i have some scepters and wedcos. Regardless, it would look like only a slight modification to the top clamp would be needed if either/or slightly didnt fit. Keep up the great work Sergio!
__________________ 2007 Voodoo Blue 4x4 TRD supercharger
TRD CAI
TRD exhuast
ARB bumper
OME lift (886s and 895s)
Warn M8000
IPF 900XSD lights
BFG AT's 285/70/r17 on stock steelies or
34x10.50r16 Super Swamper LTB's on offroad package wheels
Bajarack
Safari Snorkel
Dirty Parts dual battery kit with Optima
Demello Hybrid Sliders -Layton
__________________
07 FJC Ti.
All Pro Sliders, A/P Front bumper with small light hoop, A/P rear bumper & swingout, T/G T/C skid, IPF's, 55w rock lights, Cobra CB, Bandi mount, 4' fiberglass whip on a spring, 6" Rough Country, 2" wheel adapters, 33" MTR's, LED mirror lights, a few LED's to light up the lower switch panel. ICON 6" coilovers.....first EVER!
I would be in if it will fit the the ARB rack. Looks good! Does a water can fit?
__________________
Sponge Bob 2007 Sun Fusion , All Pro front winch bumper, 16 TRD Wheels, 265/75r16 BFG A/T ko's, ARB Roof Rack with 2 IPF 868 Light Kits up front, KC Back Up flood lights in rear,Bud Built skid plates, Trail Gear rock rails, Hella horns, PIAA Headlights, PIAA Dome lights, PIAA Back up light, MPAC side rack, MPAC Straddle, Gobi ladder, Cobra 75 WXST CB, more mods to come. TLCA # 3970
TOYOTA LAND CRUISER world's toughest all purpose 4-wheel-drive vehicle! You can follow me but it's gonna hurt!!
Click on Sponge Bob to go to Smokey Mountain Cruisers
Last edited by sponge bob : 08-20-2009 at 03:37 PM.
Reason: forgot to ask
Nice! I've been talking to Chris about these. Nice to see them. Ordering mine today hopefully.
__________________
2007 Voodoo Blue, 4x4, BFG MT KM2, Warn Bumper and Winch, Sway-A-Way 2.5” front coil-over shocks, Sway-A-Way 2.25” rear shocks, All-Pro Skid Plates and Rock Sliders, Total Chaos UCAs, and a cracked windshield.
Linear Mode
