Check them out. Thanks Jason and team. Received them yesterday and installed them at work, after hours of course
Sorry for the bad camera phone pics.
__________________ 2007 Silver Ti FJC, AT, Pre-Runner /Gibson catback pipes and tip/ Flowmaster 40 Series/Airaid Intake/RC 3" Lift /Home fabricated Airdam/Cobra 19 DX IV and Bandi mount (Semi Big Bill Set Up)/Black Steelies/Hella 500 Lights mounted on OEM front bumper/Some decals…started a collection/Gobi Ladder/ Demello Jack Clamps/Demello tube sliders/Hi Lift jack & Daystar jack isolator/285/70/17 BF Goodrich AT KO
I have the same ones and they rock! Best looking slider out IMO.
I agree. I was about to buy the hybrid sliders during the sale but then Jason posted about the new tube sliders. This is what I have been looking for.
Quote:
sealevel previously said:
Looking good. Nice sliders!
Thanks. Now I need to go hit the trails with them.
__________________ 2007 Silver Ti FJC, AT, Pre-Runner /Gibson catback pipes and tip/ Flowmaster 40 Series/Airaid Intake/RC 3" Lift /Home fabricated Airdam/Cobra 19 DX IV and Bandi mount (Semi Big Bill Set Up)/Black Steelies/Hella 500 Lights mounted on OEM front bumper/Some decals…started a collection/Gobi Ladder/ Demello Jack Clamps/Demello tube sliders/Hi Lift jack & Daystar jack isolator/285/70/17 BF Goodrich AT KO
Check them out. Thanks Jason and team. Received them yesterday and installed them at work, after hours of course
Do the sliders stick out far enough to prevent dings? I like these a lot more than any others, I just need them to be functional in preventing door dings. Thanks!
__________________
'08 Ti PreRunner Outside -Demello Bumper w/ Acro Lights, BFG AT 285's, Fox 2.0 Front & Rear, AP Rear Links (upper and lower) roof rack, Tundra Door Handles, AFE CAI (TBS will be installed when I get ahold of a torque wrench) JBA Exhaust, 8K HID's, Demello Tube Sliders, vent shades Inside - AVIC D3 w/ Bluetooth, Sirius, and iPod, Infinity Kappa 3.5", 6x9", 6.5", 4" Rockford Sub, Rockford Mono Amp, Alpine 4-Channel, Door Sill Enhancements, Viper 5900 Alarm w/ remote start, Tuffy center console, Midland CB Next - Winch, UCA's CB Mount
__________________ 2007 Silver Ti FJC, AT, Pre-Runner /Gibson catback pipes and tip/ Flowmaster 40 Series/Airaid Intake/RC 3" Lift /Home fabricated Airdam/Cobra 19 DX IV and Bandi mount (Semi Big Bill Set Up)/Black Steelies/Hella 500 Lights mounted on OEM front bumper/Some decals…started a collection/Gobi Ladder/ Demello Jack Clamps/Demello tube sliders/Hi Lift jack & Daystar jack isolator/285/70/17 BF Goodrich AT KO
Here is a pic. Not the best but looking at it in person, the slider will come in contact with the door before it impacts the FJ. The sliders stick out about as far as the plastic fenders do. Now if someone opens a rear door, I don't think that any slider will protect it because the rear door is formed around the rear wheel well.
Keep in mind that I am sitting at stock height (level lift up front). When I install a 3" lift I will be higher than most vehicles and for sure the sliders will protect. If this vehicle was raised, my FJ would have a nice ding
__________________ 2007 Silver Ti FJC, AT, Pre-Runner /Gibson catback pipes and tip/ Flowmaster 40 Series/Airaid Intake/RC 3" Lift /Home fabricated Airdam/Cobra 19 DX IV and Bandi mount (Semi Big Bill Set Up)/Black Steelies/Hella 500 Lights mounted on OEM front bumper/Some decals…started a collection/Gobi Ladder/ Demello Jack Clamps/Demello tube sliders/Hi Lift jack & Daystar jack isolator/285/70/17 BF Goodrich AT KO
Here is a pic. Not the best but looking at it in person, the slider will come in contact with the door before it impacts the FJ. The sliders stick out about as far as the plastic fenders do. Now if someone opens a rear door, I don't think that any slider will protect it because the rear door is formed around the rear wheel well.
Keep in mind that I am sitting at stock height (level lift up front). When I install a 3" lift I will be higher than most vehicles and for sure the sliders will protect. If this vehicle was raised, my FJ would have a nice ding
Sliders look great! I never thought about the rear door over the wheel on most cars smacking our side panels. I have the predator side bars and I've read they are useless as far as protection is concerned because they are mounted to the body panel?. The ones you installed mount to the frame not the body correct?
__________________
6" Fab Tech Lift, Bushwackers, 20" BBS wheels Nitto Terra Grappler 325/60/20 All Terrain tires. Spyder Trax 1.25 spacers Scuba mod, Manik tail light guards, Hunter GT807 full brush guard, Predator step bars, diamond plate interior trim, dual cd's, leather seats, Toyota Trail Team Badge.
Here is a pic. Not the best but looking at it in person, the slider will come in contact with the door before it impacts the FJ. The sliders stick out about as far as the plastic fenders do. Now if someone opens a rear door, I don't think that any slider will protect it because the rear door is formed around the rear wheel well.
Keep in mind that I am sitting at stock height (level lift up front). When I install a 3" lift I will be higher than most vehicles and for sure the sliders will protect. If this vehicle was raised, my FJ would have a nice ding
I was looking for your rig at the M&G so I could see your sliders in person. I guess you didnt get them in time. Any chance you could take a pic from the side down low. I was wondering about the gap between the rocker panel and the slider. On some other pics the gap looked pretty big for the hybrid sliders.
In my sig is a picture of my rig with my lift. Thanks again for the shop info you gave me but I went to a shop closer to home. I really like the sliders !!!
__________________ Black Diamond: FJ3 FRCC 3" Toytec, New DeMello Tube Sliders, Tinted windows, Radar, Sirius Sat., Ravelco No Hotwire, Tool Box Mounted, Stant gas cap, Flag mount mod, Cargo carrier, Polarg H4 W-Face Headlight Bulbs, All-Pro LCA Skids, MV50 Superflow Air Compressor
FJ Jammer text mod:- Back In Black -
Ordered: Nothing Wishlist: , Magnaflow Muffler #11226, , ARB Full Rack, Polished 17x9 AR Chambers
Received them yesterday and installed them at work, after hours of course 
Linear Mode
