Brand new complete rear axles with E-locker - $950 SHIPPED!

[TACOZILLA]

Complete drum to drum equipped with the e-locker and 4:10 gears for $950.00 shipped (lower 48 states).

I have a limited quantity of these available and once the last one has sold, that's it! So needless to say this offer is only good while supplies last.

They are complete axles and include the e-locker actuators. The only thing you would have to purchase extra will be your wiring and switch. The applications are from the 01-04 Tacoma year models, but you could make them fit other models with a few modifications. These are ABS equipped axles but will not be a problem for non-ABS equipped trucks as the connector/sensor can be discarded.

To place your order you need to call and speak directly to me as the guys at the front counter will know absolutely nothing about this deal. Just call the toll free number in my signature if you are interested.

Thanks!

[Son of a Son]

How will it work with the FJ since the FJ is 4 wheel disc brakes?

[TACOZILLA]

These have drums. To convert them over to discs would take a little fabbing.

[5110]

PM sent on Monday

[woooody]

Is the R&P on an FJC 4.10?

According to Toyota:
Rear axle ratio
automatic [3] : 3.72:1
manual [3] : 3.91:1

So -- what exactly are these good for? Tacomas only?

[TACOZILLA]

woooody previously said:

Is the R&P on an FJC 4.10?

According to Toyota:
Rear axle ratio
automatic [3] : 3.72:1
manual [3] : 3.91:1

So -- what exactly are these good for? Tacomas only?

I have sold a few of these to older pickup owners and certainly alot of Tacoma owners. Like I've been telling the guys who have been concerned that the gear ratio is not the correct one for their application, simply regear the axle. Better yet, regear the existing front axle to match the 4.10's. This is a $3500.00 assembly if you bought it from any other typical dealer. Just check out this thread...

Feeler: Brand new complete rear axles with E-locker. - TTORA Forum

These axles are a direct bolt up for 95 - 04 Tacoma owners, but could be used in other models with a few modifications.

I didn't really think people here would be wanting to stick one in their brand new FJC, but maybe had a beater or trail rig they needed a locked axle for.

[TACOZILLA]

5110 previously said:

PM sent on Monday

Sorry, must have overlooked that PM. I responded with a quote!

Thanks

[fjal]

I sure wish you had this up about 4 months ago when I still had my 02 Tacoma. I do not think the width will fit on a 06. Rats!

[TACOZILLA]

fjal previously said:

I sure wish you had this up about 4 months ago when I still had my 02 Tacoma. I do not think the width will fit on a 06. Rats!

The axle on your 06 is a little wider than these axles. You could make it work...a simple fix would be to use some wheel spacers to get the correct width you would need. There would be a little fabrication involved to make it work.

[bigpk]

Im sorry, but why not just regear your exisisting axle? And would the axle fit the fj? Or will that take fabbing too?