The bolts are too long to seal up the holes. You could always put a little silicone around the covers to make sure they are sealed.
__________________ 07 BD FJC 4x4 6MT
Donahoe coilovers in the fr
Donahoe springs and shocks in the rr
285/75/r16 BFG M/Ts
gun metal TRD wheels
TRD exhaust
All Pro rock sliders
rr locker
A-trac
afe CAI kit
Pioneer Avic D3 navi
Sirius radio
HID headlights
Source 10# CO2 tank
There is a bracket with 2 10mm bolts that have special washers to keep out water.
Don't drive very far without the covers on. I made this mistake when I bought my roof rack from another forum member. I took the covers/brackets off the night before the 4.5 hour drive and it whistled non-stop. I had a very bad headache by the time I got there.
__________________
2007 VooDoo Blue / 5AT / 4WD
Rear Diff Hack (Works in 2HI & 4HI) / Rear Diff + ATrac Hack
Rough Country 3" Lift
KU4IY (Yaesu FT-7800)
The bolts to fill the holes without a roof rack are shorter than the bolts that hold on the roof rack.You also need rubber backed sealing washers,I think they come in a kit from Toyota.The white plastic pieces are for asthetic purposes,to make it all look better.I used sealing washers from Ace hardware when I installed my used roof rack with some black RTV to be safe.Hope this helps.
__________________
If there are no dogs in Heaven,then when I die I want to go where they went."
Will Rogers, 1897-1935
07 titanium ,auto trans,steel wheels,
First mod-Atrac switch-local dealer parts dept.
Added a used factory roof rack from forum member(thanks,Birdman )
Tires from Discount Tire(supporting vendor)
Bumper wing eliminators from Lucrum Industries(supporting vendor)
Linear Mode
