Hey guys just a little note. The badges are being shipped with two mounting studs per badge and two nuts for the two posts. There is no backing plate. The vendor had experienced problems with providing these in the past so he does not include them. Just an FYI. If you go to the Depot or Lowes they sell small lengths of 1/2" and 3"4 x 1/8" aluminum flat stock. Cut a piece 3-1/2" long. Drill two 3/16" holes 2-1/4" on center (2-1/4" measured from center of hole to center of hole. This will make a backing plate. You can also use fender washers or as one of my guys did with the FJNortheasters Badge, use a 1/2 no mortise hinge! Yup ingenuity!Please do not forget to empty the package when you receive it, I will not be sending out additional mounting posts for any reason. It is just not cost effective.
I used a toggle fastener.
Thanks again slither.
__________________ Jeff B 07, 4X4, Blk, M/T, W/E adjustable, A/P H/D rear lower links, 285 70 17 BFG Mud, Thorley Headers, A/P front bumper, DO rear bumper, DO Sliders, Titan 10,000lb winch, Budbuilt skids, Eclipse AVN 5495, Reverse Cam, CDT Audio ES "braxial" 6 1/2 speakers w/upstage, Helix A2 amp, Galaxy DX 959 CB, Bandi mount, 102" whip antenna, ext spkr. from those now useful headliner spkrs. scan gauge II. Clifford matrix alarm.
"If you don't like it, change it, if you can't change it, change the way you think about it."
My Wife just said "What the hell have you ordered now?"
Dude, I get that from my husband ALL the time!!! Just start telling her that you have had whatever it is "for a while now". All us girls tell our hubbys that when they notice we have something new.
Whoops, I may have just broken a girl rule.....
__________________ Kim
Pura Vida!!! Costa Rican for"Pure Life" live every minute of it!
Hey guys please don't keep PMing me to see where you fall in the order. If you paid on or before November 20th before 2:00PM you're badge is in the mail. If you paid after that you were not included in the first batch. I am waiting on more mounting posts from the vendor and I won't have them until Monday. The next batch won't go out until Tuesday the earliest. Please stop holding vigil at your mailbox. If you are not up to date on the events that occured. Both of the boxes arrived in terrible condition from FedEx. One was ripped completely open and 15 badges were missing as well as all of the mounting posts for both boxes of badges. I'm doing my best to get these out. Can't ship them without the mounting posts because there are too many folks who are not mechanically inclined enough to figure out how to mount these for themselves. Thanks for your anticipated patience.
__________________ 2007 Titanium Metallic and YES I wheel it! TLCA#16880, FJ Northeasters Gotham City Land Cruisers,
6 SPEED MANUAL- ICON Reservoir Front Coilovers, ICON Piggy Back Rear Shocks, DR Racing Billet UCA"s, Body Mount Mod, Real Wheels Lightbar w/4 PIAA 520SMR XT Lights, AllPro Front and Rear Bumpers w/Warn M8000 winch, AllPro Trailing Arm skids, All Pro sliders, TRD CAI, Weld Dune 6 W/Black Beadlock rings, Toyo MT's 35x12.5x17
RASTA Full Aluminum Skids, Lots of Badges! Daily Driver:2005 Toyota Tacoma C cab
Please do not forget to empty the package when you receive it, I will not be sending out additional mounting posts for any reason. It is just not cost effective.
Kim
2007 Titanium Metallic and YES I wheel it!
Linear Mode
