My understanding production will not start until the 10th correct? I thought maybe once we get to 50 production might start on the 1st batch.
That's what I was told too, but if I hear any different I'll let you know. Of course, after waiting this long, what's another 6 days?! But really, all I know at this point, is the 10th.
K
__________________
'07 FJ Voodoo Blue,
Toyo 295/70-17 M/T's
ToyTec custom lift
Expedition One bumper and sliders
...and, some Moab dirt
'69 3/4t Camper Special Chevy
Orange w/white roof
'05 V-Star 650 Custom, Blue w/blue flames and lots of chrome
I am going to have to forgo this one this time. Kathie, thanks for puttin me on the alternate list. I may try later.
thanks,
mike
__________________ '07 Titanium metalic
Expedition One Bumper with Bullbar with Superwinch
Toytec Light racing C/O, Toytec 2" spring in rear
All Pro Sliders, Bud Built Skids
285x70x17 MT/R
That's what I was told too, but if I hear any different I'll let you know. Of course, after waiting this long, what's another 6 days?! But really, all I know at this point, is the 10th.
K
Very true. Just excited..........so I wanna get it as soon as possible.
I talked to All Phase today and got mine ordered. they said i should have it right before the end of the year. I was already dead set on getting one of these anyway, thanks to all for getting the GB together and saving us all some cash.
__________________
07 voodoo blue
Fewer Mods than some,More Mods than others
Just wanted to ask if there are pictures of the updated version actually on an axle?
(Yes, mine is ordered!!)
I haven't seen one, and don't know if there is one besides the prototype, or what happened to that one. Not sure if Don was around for the test fits, or if he just left his FJ. maybe he'll check in later.
K
__________________
'07 FJ Voodoo Blue,
Toyo 295/70-17 M/T's
ToyTec custom lift
Expedition One bumper and sliders
...and, some Moab dirt
'69 3/4t Camper Special Chevy
Orange w/white roof
'05 V-Star 650 Custom, Blue w/blue flames and lots of chrome
Just wanted to ask if there are pictures of the updated version actually on an axle?
(Yes, mine is ordered!!)
These are the only pics I have. Each time we did the mock-up they never had the correct U-bolts. AP was just making sure the skid was welded correctly and lined up on the axle. The only had to make small changes for it to fit better than the orig. one. They also had the mounting plates cut out and made thicker(shown in the second pic). Both of these pics are still only the prototypes, but I doubt you could tell the difference from the production one.
__________________
TLCA#16292 Toytec custom coil lift,SS brake lines. PM me for Discountshttp://www.toyteclifts.com/fjcruiser...ruiserliftkits All Phase Offroad diff skid,engine skid,Hi-Lift mount,axe/shovel mount,HD LCA frame mounts. Spidertrax spacers. All-Pro HD LCA's,Bandi mount. FabFours front bumper w/PIAA lights
Stock Toyota steel wheels with 35" MTZ's.Gas/water cans mounted to stock rack. Midland hand-held CB. Thule fairing. OEM rock rails. A-Trac/Locker hack.
But really, all I know at this point, is the 10th.
'07 Titanium metalic
Linear Mode
