well what you actually do is you lift up the right side.. take the wheels off then lower it on some bricks.. then you jack up the left side and replace those wheels
__________________
Vehicle: 2007 Toyota FJcruiser
Color: Silver
Exterior: Mini-Me roof rack mod, removed fender flares, Hella black magic driving lights mounted on stock bumper.
Interior: Scan Gauge II, A-Trac Switch, 20%tint, cobra75st CB, bandi mounted 3" firefly antenna.
Suspension: Light Racing Coilovers (Front) Toytec 2"Coils/Bilstein shocks (rear)
Wheels: Stock Black Steelies
Tires: 34x10.5x17 SS LTB (tall and skinny)
Mid west off-road forum Missouri Off-Road Forums
SF Pre Runner - Flowmaster Series 50, Razors with BFG KO's, R.E.D Light Bar, PIAA 520's and PIAA 510 Fogs, AF HL Covers, Hella Dual Horns, Dirty Parts Dual Battery, aFe CAI, Vent Visors, Trail Gear Sliders, Demello Skid, AP 2" FOX Adj Res. Suspension, upper and lower Links, Shock Skids, Sway Bar Links, AP Airdam/light bar w/PIAA 510's, Coleman Rack Basket, Hi Lift, Spidertrax spacers, Tuffy Cargo Box and Ellis Interior Grab Handles.
Looks like my suspicions were right.. I had some bad welds on my muffler so once I reached enough back pressure, the exhaust was being forced out the weld. I'll be jacking up Slim in a couple minutes.
__________________
"Slim" - 2007 Black Cherry 4x4 Manny Tranny w/ Factory Rock Bars, Driver / Passenger Side Window Tint, Powertank w/ Griot's Tire Inflating Gun, Lucrum Stock Bumper Winch Mount & Light Bar w/ Hella Rallye 4000 Compact, Warn 9.5Ti Winch, Dual Battery, Extra 12V Outlet or two, All Pro Front Skid Plates, All Pro Rear Link Skids, MagnaFlow Perfarmance Exhaust Model 11226. OME Lift, BFG 285/70/17 Tires, Springtail M-Pac, WAAG XS Basket
Looks like my suspicions were right.. I had some bad welds on my muffler so once I reached enough back pressure, the exhaust was being forced out the weld. I'll be jacking up Slim in a couple minutes.
I think i may have the same problem from having my JBA catback exhaust on. I had the seams welded but i think there is leaks because i see water drip out occasionally. Will rubbing JB weld over the seams seal them up???
I have never used the stuff so i am not sure how effective or how it works.
Linear Mode
