hella black magic instructions needed..help pretty please.

[oragon]

i lost my darn instructions, i am left with a bunch of wires with no clue.
an email, pm, or pdf post will be greatly appreciated.

thanks,
gerard

p.s. for some reason, the hella site does not have any support for this model.

[TheDudeAbides]

You could try these.
http://www.hella.com/produktion/Hell...structions.pdf

http://www.hella.com/produktion/Hell..._aux_lamps.pdf

Wiring lights is pretty easy. You should be ok if you have some basic skills. This is how it works:
You should have a wire from each light that go to a relay then the relay gets power from the battery [ make sure it is fused and use a good connector ], ground [ you can use an existing ground in engine compartment or scrape the paint down to the bare metal and use a ring connector,self tapping screw and attach it right to the bare metal then silicone over it if you want]. Then there should be a wire running off teh relay to a switch that you mount inside. Or if there is no realy then everything runs right to the switch. Not sure what that light kit has it, but hopefully these help you out. You can also tap into your headlight switch and that is in the insructions above. Good luck. Maybe somone else might have some other idea I might of missed that they will post.
You could also call Hella and see if they can get you a new set of Inst.
Later.