DIY LED Dash Swap: Gauge Cluster, AC, and Compass - Page 2

rich_4 · 12-25-2007, 07:24 PM

This is great..thanks

someone did this last year, and was about to explain how in a write-up like this, and then for some reason got mad and left and never explained how he did it. So thanks a lot, I've been waiting on this for a year!

TinCan · 12-25-2007, 07:27 PM

Quote:

rich_4 previously said:

This is great..thanks

someone did this last year, and was about to explain how in a write-up like this, and then for some reason got mad and left and never explained how he did it. So thanks a lot, I've been waiting on this for a year!

lol... well its a lot of typing...if you need help just PM me... I also can do this for people if they feel like being without the dash, AC, and Compass...for a day or two...

***LandCruiserSteve*** · 12-25-2007, 08:10 PM

Quote:

TinCan previously said:

I'm not too sure about all this "approved to be a technical articles" but this thread is very complete from start to finish!

Nevertheless, it still has to go through the stated process.

I'm going to move this over to Interior/Exterior Mods, and then edit it as necessary for posting in the Tech Article section.

TinCan · 12-25-2007, 08:13 PM

Quote:

LandCruiserSteve previously said:

Nevertheless, it still has to go through the stated process.

I'm going to move this over to Interior/Exterior Mods, and then edit it as necessary for posting in the Tech Article section.

what editing are you going to do to my DIY? also the pics need to go with it.

rhettdog · 12-25-2007, 08:17 PM

Thanks for the write up, looks good, I have been wanting to do this to my A/C too but have been to scared, My only LED swaps have been on cell phones not dashes...

TinCan · 12-25-2007, 08:18 PM

Quote:

rhettdog previously said:

Thanks for the write up, looks good, I have been wanting to do this to my A/C too but have been to scared, My only LED swaps have been on cell phones not dashes...

If you can swap a cell than you can do the dash/AC

***LandCruiserSteve*** · 12-25-2007, 08:22 PM

Quote:

TinCan previously said:

what editing are you going to do to my DIY?

Whatever editing that is deemed necessary to meet the criteria and format for permanent archiving of your thread in the Tech Article section, if approved.

http://www.fjcruiserforums.com/forum...g-posting.html

Quote:

TinCan previously said:

also the pics need to go with it.

Understood. However, we'll need full-sized pics within the thread (rather than thumbnails). If you post those within your initial post, that will expedidite the process.

You might want to read some of the other permanent Tech Article threads to get an idea about layout and pics.

Thank you.

rhettdog · 12-25-2007, 08:24 PM

Quote:

TinCan previously said:

If you can swap a cell than you can do the dash/AC

Good news thanks! I've done about 10 cells in the past and only had to re-do one, so I may tackle this.

**DEWFPO** · 12-25-2007, 08:44 PM

Very nice job, thanks for the detailed write-up including the numerous pics.

DEWFPO