Side Visor Install

[bearyota]

HAS ANYONE INSTALLED A PAIR OF SIDE VISORS YET?
I just purchased mine from the dealer and asked if they had installed them before but, they had not. So my question is are there holes behind the headliner to accomodate the hook like pieces on the side that mounts against the headliner under the grab handles?

[rotorhed1]

No, there aren't any holes behind. Now there are several threads on this topic, but here's my thoughts rather than "do a search".

I installed these on my '07, love them! I used an awl to poke holes in the headliner where the little hooks go. I just aligned the mount holes and pushed a bit to make indentations for where the holes should be for the hooks. Others have just snipped the hooks off and say that works too. 10 minutes to do the install.

[FJDave]

I snipped off the hooks. Works great! Best $25 per side I ever spent on the FJ!!!

[pokerDawg]

I just got my set in the mail.

How do you take the caps off the grab handles without damaging it? A flat head screw driver will gauge it.

[ebhudgens]

pokerDawg previously said:

I just got my set in the mail.

How do you take the caps off the grab handles without damaging it? A flat head screw driver will gauge it.

Simply place a pocket knife in the short seam - not the long side seams - and nudge the insert out. If you are careful, it will leave no marks.

[bearyota]

Thanks alot for the advise on the awl thats a great idea!

[pokerDawg]

Ok...I'm done. I used a butter knife

I also snipped the plastic hooks.

Thanks!

[GTKrockeTT]

next to the ATRAC button, it was the fastest mod i've done. that said, i have yet to actually make use of the visors. i just never seem to catch the sun at the right angles.

[CactusJK]

IMO cut the clips off and don't poke holes in the headliner! The clips do not add anything.

[NBFJCruz]

Clip the clips......check!!!!

Where are you guys ordering these from for only $25 a side????