Inspired by many previous designs, I wanted something that was modular and had components that I can mix and match depending on what was required, and could accommodate my ARB Fridge.
Here's the clean slate
Plywood base in place. I removed the plastic thing that spanned the back of the rear seats to get a bit more space.
Base covered with black outdoor carpet, and foot mounts from the Engle Slide-Lok in place. To insert/remove fridge, just push down the driver side rear seat to gain access.
Drawer module mounts to the base at each corner. One corner uses an existing mount, the other three using inset nuts in the base board.
ARB Fridge removed and storage module inserted.
side storage module has a lift up top for access.
Stuff still to do.
make another drawer module for driver side
put in locks
perhaps a stackable drawer
have all the plans on many scraps of paper, will try to organize and make presentable if people are interested.
T
Here's the clean slate
Plywood base in place. I removed the plastic thing that spanned the back of the rear seats to get a bit more space.
Base covered with black outdoor carpet, and foot mounts from the Engle Slide-Lok in place. To insert/remove fridge, just push down the driver side rear seat to gain access.
Drawer module mounts to the base at each corner. One corner uses an existing mount, the other three using inset nuts in the base board.
ARB Fridge removed and storage module inserted.
side storage module has a lift up top for access.
Stuff still to do.
make another drawer module for driver side
put in locks
perhaps a stackable drawer
have all the plans on many scraps of paper, will try to organize and make presentable if people are interested.
T