New Product from Lucrum Ind. - Bumper Wing Eliminators!

**Lucrum** · 02-05-2008, 07:23 PM

Ok here are the pictures of the first set of BWE's hot out of the molds!!! Frogeye and FJ Ollie get the first sets. Going to install the first pair onto Frogeye's FJ tomorrow afternoon and will get back with the pictures and info after were done. These pictures were taken today at the shop and show the BWE's bare without paint but with the adhesive emblem tape on them. They will be available in Black and can be painted to match (edited, BWE's will come with black gel coat that will last much longer than paint and take scratches. if you want another color just paint them to match) Lucrum Winch Mount and Lucrum BWE's make a great package! Nice!!

The way these will work will be like this:

1. Remove the bumper cover

2. Remove the Bumper Wings

3. Use a utility knife to remove the mold marks from the plastic on the bumper cover under the Bumper wings (picture will be provided)

4. Break the primer stick that comes with the BWE's and rub it all around the area where the BWE's attach to.

5. Pull the tape backing off of the BWE's and stick them on. (The tape used in the BWE's is the same industrial 3M tape used to hold on your emblems for years and years and will last a long time)

6. Put the Bumper cover back on and clean up! Your done!

Will have more info in the next couple of days and will try to answer your questions as soon as possible but may be delayed a bit since I am going on my honeymoon next week

.

Here are the pics

Front View:

Side View:

Other Side View:

BWE in Bumper:

Pre-Orders will be accepted now and the introductory price until February 22nd. will be $159.99USD per pair plus shipping $8, less than the price of one bumper wing! You can send your payment via Paypal to payment@lucrumind.com or order by phone at 760-716-4472 9am-5pm M-F pst. or order from our website which is not updated yet but will be updated shortly to take orders and answer questions.

Delivery will start the week after the 22nd and initial production is limited to ONE PAIR per day because of mold costs so order yours now if you want them. If demand is great enough we will have more molds made to keep up with orders. THANKS!!

FJinDFW · 02-05-2008, 07:29 PM

Look forward to seeing them installed.

frogeye · 02-05-2008, 08:13 PM

Oh right on new BWEs! I'm really looking forward to getting rid of my front wings.

04e46conv · 02-05-2008, 08:14 PM

Thanks for the pictures!! Are they for the rear only??

frogeye · 02-05-2008, 08:17 PM

Quote:

04e46conv previously said:

Thanks for the pictures!! Are they for the rear only??

Front wings only

04e46conv · 02-05-2008, 08:29 PM

I am confused I thought the front wings are mounted to the bumper and then the bumper is one piece? what is in the picture?

frogeye · 02-05-2008, 08:32 PM

Quote:

04e46conv previously said:

I am confused I thought the front wings are mounted to the bumper and then the bumper is one piece? what is in the picture?

The front silver wings that stick out on each side of your tupper ware bumper come out, it's not one unit.

04e46conv · 02-05-2008, 08:35 PM

Quote:

frogeye previously said:

The front silver wings that stick out on each side of your tupper ware bumper come out, it's not one unit.

Yes I understand that but I dont understand why in the picture there are 2 red parts what are those? I thought you have a bumper and two wings attached so if you remove the wings you will have one bumper but the picture has two pieces???

frogeye · 02-05-2008, 08:38 PM

deleted

04e46conv · 02-05-2008, 08:42 PM

I know what the wings are I was just saying that I was pert sure that was not a front bumper and I think those pieces are the rear bumper pieces...