Still like the look of rear bumper set up! Question on the bumper are those turn and stop LED lights? An I do not see the "BACK-UP" sensor's. I like this look, but I do not know if I can afford it.
Yes thy are turn and stop led lights. Also, there is a lot of metal in this bumper, Kaymar said all the steel would interfere with the rear backup sensors, so i did no have them drill the bumper to install them. Backup cam will be my next mod probably
__________________
08 Diamond Black 4x4, Kaymar rear, Arb Front, 33" Nitto Terra Grapplers on Pro Comp blacked out rims, TRD Cai, TRD Exhaust
Self Done mods: Rear Lcd for the little man, Alpine Stereo and speakers, Overhead Console with map lights and Scangauge, Blacked out Side Mirrors, CB install with front Antenna, Dual Battery install with new fuse block....
Looks good. I see the paper plates still on there from Torrance Toyota. That's where I picked mine up from. Are you in that area?
__________________ 2007 Silver Ti FJC, AT, Pre-Runner /Gibson catback pipes and tip/ Flowmaster 40 Series/Airaid Intake/RC 3" Lift /Home fabricated Airdam/Cobra 19 DX IV and Bandi mount (Semi Big Bill Set Up)/Black Steelies/Hella 500 Lights mounted on OEM front bumper/Some decals…started a collection/Gobi Ladder/ Demello Jack Clamps/Demello tube sliders/Hi Lift jack & Daystar jack isolator/285/70/17 BF Goodrich AT KO
I'll betcha that there will be more rear bumper with swingout arrangements in the future. I emailed Garvin today because they make a sweet one for Jeeps. Check out the photos!
__________________
.
Keep away from people who try to belittle your ambitions. Small people always do that, but the really great make you feel that you, too, can become great. --Mark Twain
.
TLCA Member #18690
I'll betcha that there will be more rear bumper with swingout arrangements in the future. I emailed Garvin today because they make a sweet one for Jeeps. Check out the photos!
Yeah, I'm surprised that no one seems to be tying into the rear roof rack bolt locations for handling the weight distribution issue. That way it would work with most any roof rack configuration.
__________________ The NOMAD (Sandstormer's build)
'08 Sandstorm: TRD CAI, OME 885/N140S Front & 896/N142 Rear, Terra Grapplers 285/70-17, Expedition One Trail Series Diamond Bumper, Metal Tech Sliders, All BudBuilt Skid Plates, Wilderness Expedition Rack, Third Row Seat/Lockbox, MPAC Gear Racks, Dual Optima Batteries, Cobra 75 WX ST/Bandi Mount, Black TTSE Mirrors, Black Tundra Door Hardware, White Bezel/Nameplate
Wondering if blacking out the stainless diamond plate piece would make the unequal gap appear smaller. Clean FJ!
The Gap is actually on each side of the bumper not along the top, so i dont think blacking it out will help.
Quote:
FJC8871 previously said:
Looks good. I see the paper plates still on there from Torrance Toyota. That's where I picked mine up from. Are you in that area?
haha yeah I live in torrance
__________________
08 Diamond Black 4x4, Kaymar rear, Arb Front, 33" Nitto Terra Grapplers on Pro Comp blacked out rims, TRD Cai, TRD Exhaust
Self Done mods: Rear Lcd for the little man, Alpine Stereo and speakers, Overhead Console with map lights and Scangauge, Blacked out Side Mirrors, CB install with front Antenna, Dual Battery install with new fuse block....
Linear Mode
