MODS Body Mount Chop
Removed Flares
Fiberglassed Cover's
Fiberglassed Sub-Box
Window Tint
Home Made Gun Rack / Dog Barrier
Airbrushed Inserts
Rhino Coated All Exterior Plastic
200 SQ Feet of Dynomat
WHEELS/TIRES
MB Motoring Razor's 20X10 -25 Offset *Custom bored out hub's to fit*
Nitto Mud Grappler's 33X12.50R20
LIFT 3" Rough Country Lift
ELECTRONIC'S 3000 Watt PIONEER SUB 1 Ohm
3000 Watt SoundStream 1 Ohm MONO Block
BIG BILL CB Combo W/Bandi Mount
Heated/Cooled Beverage holders
PIAA Head Lights
Cobra Radar-Detector
Garmin GPS
I liked the look of the plastic flares removed, but I just could not leave it how everyone was, with holes and gap's showing. If your going to remove them I figured, why not make it look factory. I have a lot more planed but that will come with time and money. Here is a start. . .
Stock
Under Construction
NEW LIFT & WHEELS/TIRES
INTERIOR
FIBERGLASSED COVER'S THAT I MADE WHEN REMOVED FLARES
Very nice. Good Job. Diggin on the rims and tires. I like how you finished off the black lower peices after removing the fenders. Can you tell us how that was done. fitting the removed peices back in to look stock. Thanks.
__________________ PERFORMANCE: Airaid intake, Gibson Exhaust, Royal Purple Oils LIFT KIT: Toytec/Donahoe Racing 3", Spidertrax spacers EXTERIOR: Rear Tail lite Guards, GoodYear MT tires, AP Sliders, PIAA Headlights/dome lites, Fourtrex, Hi-lift COLOR: Voodoo Blue 4x2 AUDIO: Dice iPod interface INTERIOR: ScanGuage II, Ellis Design Black Handles & Battery Clamp. Littlelite 12" map light W/ Dimmer. My Build:http://www.fjcruiserforums.com/forum...shockwave.html
Location: The Beautiful Pacific North West in Yakima, Washington
Posts: 658
Re: Fj Cruzer's Build Up
Quote:
AceTechno previously said:
Very nice. Good Job. Diggin on the rims and tires. I like how you finished off the black lower peices after removing the fenders. Can you tell us how that was done. fitting the removed peices back in to look stock. Thanks.
Layer's and layer's of hand molded Fiberglass, I was going to post write-up later in the Visual Mod Threads.
Location: The Beautiful Pacific North West in Yakima, Washington
Posts: 658
Re: Fj Cruzer's Build Up
I forgot to mention, I plan on painting all the exterior silver and the wheel's flat black. It is winter now, so I might as well hold off until spring for that. I will be going to get some action shot's this saturday.
Location: The Beautiful Pacific North West in Yakima, Washington
Posts: 658
Re: Fj Cruzer's Build Up
Here is some more photo's I took on my lunch hour while at work (at least I could take them outside, couldnt get a wide shot in my garage) Showing it more with the flare's removed and moded cover's. *Will post action shot's with new mod's on Saturday, and more to come*
I could not resist posting this photo that JIM took at my first NWFJCC meet in Stevenson. I did not have the mod's yet, but still an awsome shot. . .
Fj Cruzer's Build Up
*
PERFORMANCE: Airaid intake, Gibson Exhaust, Royal Purple Oils
Re: Fj Cruzer's Build Up
Linear Mode
