Where do I get the OEM Rack clamps

Runt · 05-14-2008, 10:23 PM

All right I searched and scanned the internet but I cannot seem to find a source for ordering the 1 ¾” tube clamps. So many members have used these to build their own high lift and Axe/Shovel mounts for their OEM rack. I would like to build my own. Can any one point me in the right direction? Thanks in advance.

**VooDude** · 05-14-2008, 10:41 PM

couple options...

search for roll bar clamps on ebay in the size you have above...

do what i did... u-bolts and some aluminum flat bar...

if you oversize the u-bolt, and pad the roof rack with foam tape, you can put a larger piece of flatbar (instead of the included little bar that comes with a u-bolt), drill it, and use 2 quick fists (one on each stud, stacked) to make a quick, easy shovel/axe setup like this...

**VooDude** · 05-14-2008, 10:43 PM

before you guys give me crap about the stickers... i'll make it easy... that's like 1000 hp worth!

layonnn · 05-14-2008, 10:49 PM

Funny you should ask, i searched a while back and found two links.

Allstar Setup Tools & Accessories@ RACEPARTSUSA.COM Oval Track Racing Parts and Accessories

The second ones look more like fourtreks.
JOES Racing Component Clamp Brackets

FJCcrawler · 05-14-2008, 11:52 PM

There are a few options: the Fourtrek clamps that are $105, the demello clamps that are $89, or the self made ebay clamps that are about $25 including hardware. I made my own just b/c they are cheaper and works just as well as the others.

Heres a thread you might want to look at.

Where do you mount your hi-lift?