Summit goers from the NW, list any spare parts or special tools you are bringing
Summit goers from the NW, list any spare parts or special tools you are bringing
Good idea for those from the area to make a list of spare parts/tools that we all will have with us. This way if someone needs something we have an idea where to look first, this also makes it easier to return/replace what was barrowed. Post up, even if its just basic hand tools again its just best to know we can be available to help each other out if needed.
Metal-tech will have:
Tools:
Trailer and tow rig
Portable welder/drill/sawz-all
Battery charger
Basic hand tools
Floor jack
Jack stands
Set of factory service manuals
Parts:
Front half shaft
Transfer case (I have one not sure if it will go or not)
Battery
I am working on a spare rear 3rd member. (non locked) Need to get front seals R/L in case a half shaft needs swapped. I am also working on a spare set of drive shafts.
Re: Summit goers from the NW, list any spare parts or special tools you are bringing
Quote:
Bennutt previously said:
Other than the Hi-Lift... I just have recovery strap, basic hand tools, and perhaps most important, a credit card.
The only spare part I have is a spare tire cover in my garage.
J
Knowing you have a hi-lift is a great resource for when one is needed. Not everyone has one and when that one job comes around needing it you’re the man. Hi-lifts are quite universal sure they can lift up the truck or with some straps winch a truck out but did you know it’s the #1 off road tire tool!? Need to pop a bead and replace a torn out valve stem. The hi-lift will pop the bead in no time. Ok ok and I am sure there might be someone wanting to barrow your Credit card!
Future Mods: Chainlink steering wheel and dingle balls.
_____________________________________________
Chuck Norris once took a math test and wrote "violence" for every answer.
He got an A+ because Chuck Norris solves all his problems with violence.
ZipTip® Pipette Tips
The standard for microvolume MS sample preparation
Available with 4 different chromatography media
Compatible with pipettors, HPLC needles, or automated liquid handlers
ZipTips are ideal for low/mid-throughput research applications. The 10 µL pipette tips are available with a variety of chromatography media immobilized at their ends.
Samples are bound by aspirating through the resin several times. Contaminants are washed away and concentrated, purified sample can be eluted directly onto a MALDI target in 1 - 4 µL of MS-compatible buffer.
ZipTipµ-C18 contains a micro-bed of resin for elution volumes as low as 0.5 µL .
Re: Summit goers from the NW, list any spare parts or special tools you are bringing
tie wire and a screw gun can fix about anything!!! zip ties too, I have a full set of sockets, allens, hammer, mallet, lot of tools, hi lift jack, silicone spray, screwgun, grease gun, lithium grease, etc etc.......
__________________ Romp Master General Tucson Unified Romping District (TURD)
HEG LUMPER #666 full back!!
TucsonTrail Blazer
Chiva/Gap/cave canyon/rice peak/Chimney Rock
Northern AZ
Broken Arrow/Cinder Hills (Suicide $ Hundered $ Hill)
90% Driver 10% vehicle(quote from drunk Navajo driver) Free Chefj!!! Scuba Drivers unite
Tucson Unified Romping District (TURD)
Linear Mode
