NWFJCC - Group OME Install

[Son of a Son]

ok tomorrow afternoon I am getting it done

[egecko]

Here is the alignment specs that everyone is using from the suspension tech forum after a lift was installed. It's also been made into a sticky.


Suspension Tech - FJ Alignment Specs

FJ Alignment Specs

--------------------------------------------------------------------------------

2007

FJ Cruiser 4X2

FRONTSpecificationNeg. TolerancePos. ToleranceLeft Camber-0.57°0.50°0.50°Right Camber-0.57°0.50°0.50°Cross CamberLeft Caster3.57°0.50°0.50°Right Caster3.57°0.50°0.50°Cross CasterTotal Toe0.08°0.17°0.17°Left SAI12.92°0.50°0.50°Right SAI12.92°0.50°0.50°
2007

FJ Cruiser 4X4

FRONTSpecificationNeg. TolerancePos. ToleranceLeft Camber0.15°0.50°0.50°Right Camber0.15°0.50°0.50°Cross CamberLeft Caster2.82°0.50°0.50°Right Caster2.82°0.50°0.50°Cross CasterTotal Toe0.08°0.17°0.17°Left SAI12.35°0.50°0.50°Right SAI12.35°0.50°0.50°

When you get the alignment done the caster will more than likelly not go back to within specs. What you want to do is get camber as close to center as possible and have the right front caster be .40-.50* greater than the left side this will insure that the vehicle tracks straight and will have no tire wear issues as long as tires are rotated properlly.

[BDFJ]

My dealer used those specs to align mine today and it has never tracked so true since the day I owned it. Great specs!!!

[egecko]

BDFJ previously said:

My dealer used those specs to align mine today and it has never tracked so true since the day I owned it. Great specs!!!

Good thing I posted them up for everyone to use!