Guys, We've had two instances of folks reporting bulges and rips in post 01/07 vehicles. Has this been confirmed? Any photos available???
With fingers crossed...
dale
BUMP!!!
__________________
Happy Trails!
TLCA #17625
LOS TRES AMIGOS IN MEXICO
TITANIUM METALLIC--A/T
ARB Bumper - Warn Winch - OME Heavy 286/295 - Bandi Mount - All-Pro Lower link skids - Bud Built skids - Snorkle - Toyota prefilter (cyclone air filter) - Optima Yellow Top Battery - Painless Dual Battery Control System - Scuba Driver Mod - Kenwood DN
X 7120 GPS - A-TRAC mod - 110v add-on - Rock Rails - Rear Locker - Roof Rack - BFG TA/KO's - ARB Fridge/Freezer - '08 side visor mod - Royal Purple fluids - E3.68 Spark Plugs - All Pro Rear Bumper - M-Pac rear and side mounts
To be continued...
I just spent an hour photoing and trying to explain what is going on here....am I on everyone's "ignore" list or what????
It has ABSOLUTly nothing to do with the bumper... i've seen several completly stock fj's with these fractures,, i even had a bulge on mine before i put 32 tires on.
It has ABSOLUTly nothing to do with the bumper... i've seen several completly stock fj's with these fractures,, i even had a bulge on mine before i put 32 tires on.
What??????????
The bump was to revise my question asking for more info on what if any, post 01/07 builds had rips.
__________________
Happy Trails!
TLCA #17625
LOS TRES AMIGOS IN MEXICO
TITANIUM METALLIC--A/T
ARB Bumper - Warn Winch - OME Heavy 286/295 - Bandi Mount - All-Pro Lower link skids - Bud Built skids - Snorkle - Toyota prefilter (cyclone air filter) - Optima Yellow Top Battery - Painless Dual Battery Control System - Scuba Driver Mod - Kenwood DN
X 7120 GPS - A-TRAC mod - 110v add-on - Rock Rails - Rear Locker - Roof Rack - BFG TA/KO's - ARB Fridge/Freezer - '08 side visor mod - Royal Purple fluids - E3.68 Spark Plugs - All Pro Rear Bumper - M-Pac rear and side mounts
To be continued...
I just filled out my Toyota product quality survey and I told them about my bulge in there. I included a link to this thread. I hopefully will be contacted. I need to get to the dealer and show them though.
__________________ 2007 FJ, Voodoo Blue, CP, UP#2, OEM Skid Plate, K&N Drop-in Air Filter, Garmin Nuvi 200, Sirius,
Zune, Steering Wheel Cover, Blue License Plate Cover, OEM Rock Rails, Tow Hitch, Yakima FullSwing 4, Axe, Fire Extinguisher, Shovel, Air Compressor, 4D Mag Lite, Rite Lite Mod, Bandi Mount, Cheap RadioShack CB, Firestick Firefly 3', VentShades, Dick Cepek Mud Country's, Receiver Shackle, Hi-Lift Jack, AFE CAI
Future Mods: Chainlink steering wheel and dingle balls.
_____________________________________________
Chuck Norris once took a math test and wrote "violence" for every answer.
He got an A+ because Chuck Norris solves all his problems with violence.
Re: Engine Bay Body Rips - Manual Trans Exempt ???
I've noticed something while checking FJs that come into our shop - THe manual transmission FJCs have a large plate mounted to the D/S inner fender well, used to support the clutch master cylinder. It mounts directly over the area that would bulge and crack. I have not seen the problem on any of these vehicles yet. Do all the members with bulges/ cracks have the auotmatic trans ??? Just wondering if the clutch master mounting plate prevents the issue on manual trans models....
Post up here, please.... TIA
__________________
" I'm not aware of too many things, but I know what I know, if you know what I mean..."
"Your enthusiasm for the subject borders on the interesting..."