So cal is quite a big place, PM socalocfj and see where he got his done, there are plenty of shops, just depends where you live. If you were getting a 3" I'd offer my services for cheap, 12 pack and pizza.
__________________ Ligten up, it's the internet!
Quote:
air previously said:
dude, honestly shut your keyboard mouth.
Quote from: BigDouggieDoug
You and BoBoNel don't count. You two run over everything!
I installed my RC 6", it was not a bad day project. If you feel like coming up to Victorville let me know.
__________________
07 FJC Ti.
All Pro Sliders, A/P Front bumper with small light hoop, A/P rear bumper, IPF's, 55w rock lights, Cobra CB, Bandi mount, 4' fiberglass whip on a spring, 6" Rough Country, 2" wheel adapters, 33" MTR's, LED mirror lights, a few LED's to light up the lower switch panel.
I was brave enough to have my 3" done at a 4 wheel parts... No issues yet. Based solely on my experience, I'd recommend them, but there's a trick to it, so PM me if interested.
__________________
"JULIET" is my '07 VooDoo Blue 6MT Hybrid (Gas/Air) /Black Steelies TLCA#17788 / OME 886/895
GIBSON Exhaust / ARB Sliders / AP Bumper & Skid / Warn 9.5xp / Viking line & fairlead
AVIC-D3 / Viper / Alpine PDX-5 / Type R 6.5 Comp / Type R 6.5 Coax in PODS / WickedCAS w/ 2 10w1v2's
"60 percent of the time, it works every time."--Sex Panther Cologne
Amazing! You guys are too kind! Who knows, I may have to take you up on that offer plnfixr320 :P
PM if you wanna do it. If you call RC and talk to "Ben" he will give you the forum price and UPS it to you. Once you install it you will need to get an alignment. You will also have to either run wheel spacer/adapters or after market wheels with 4" or less backspacing. I am running 2" spacers, but you could get away with 1" or 1.25" depends on what look you want.
__________________
07 FJC Ti.
All Pro Sliders, A/P Front bumper with small light hoop, A/P rear bumper, IPF's, 55w rock lights, Cobra CB, Bandi mount, 4' fiberglass whip on a spring, 6" Rough Country, 2" wheel adapters, 33" MTR's, LED mirror lights, a few LED's to light up the lower switch panel.
I was brave enough to have my 3" done at a 4 wheel parts... No issues yet. Based solely on my experience, I'd recommend them, but there's a trick to it, so PM me if interested.
NRA LIFE MEMBER
Linear Mode
