Great job Bandi! I sure hope you are getting compensated for your original idea! If not, thank you for all your hard work! I'm looking forward to getting one of these babies!
__________________
Dale & Lori Titanium FJ MT 4X4
Swamper LTB09 34x10.5x17 on
Black Toyota Steelies
All Pro lift with adjustable
Walker Evens gas reservoir
shocks.
All Pro lower control arms
Warn 95XP
All Pro Winch Bumper W/light bar
IPF 968 lights
Dual Batteries
Bandi Mount
All Pro IFS & tranny skid
Yes, It was worked out between Myself and All-Pro... Like I said, I think, before, Now I have time for the Wife and Kids... Thats A Great Thing !!!
The most important thing to me was that You guys Still get the SAME product that I was Producing and that those on the "Bandi Mount" List did not lose their place...
This really doesn't have anything to do with Bandi's mount but, I had my old Galaxy 959 stolen so I purchased another Galaxy radio from the folks at this link, http://www.radioactiveradios.com/index.html. This radio is so awesome that I felt I had to pass on my resources. Anyone interested in purchasing a new radio, check these guys out! They will do what they call the "Super Wack Pack" before shipping the radio out and will warranty their work, unless the seals are broken! This radio tuning significantly increases the output and receive, as you will find out from the folks that can hear your radio!
__________________
Dale & Lori Titanium FJ MT 4X4
Swamper LTB09 34x10.5x17 on
Black Toyota Steelies
All Pro lift with adjustable
Walker Evens gas reservoir
shocks.
All Pro lower control arms
Warn 95XP
All Pro Winch Bumper W/light bar
IPF 968 lights
Dual Batteries
Bandi Mount
All Pro IFS & tranny skid
I Keep getting messages inquiring About the "Bandi Mount"...
So this IS a Good THING!!! I am going to be famous !!!
Wow. You must be famous. You asked me to post pictures of your "bandi mount" after I installed it. I did and you didn't even comment on it. Sure sign of fame.
Last edited by NautiDog : 09-29-2006 at 08:21 PM.
Reason: delete
I installed my new Bandi mount and ran the coax to under the front drivers seat. Loosened up the plastic on the drivers side so I could run the coax inside. Not to bad of a job. Just get the interior section from the online manual.
mike
__________________ '07 Titanium metalic
Expedition One Bumper with Bullbar with Superwinch
Toytec Light racing C/O, Toytec 2" spring in rear
All Pro Sliders, Bud Built Skids
285x70x17 MT/R
'07 Titanium metalic
Linear Mode
