I made three different sized mounting plates before I came up with the one I needed. I have the patterns outlined and have FAXed them to a couple members. If you want the patters PM me and I can FAX them to you.
__________________ "Life is a full contact, participation sport. Get in there and play "
This is ALMOST exactly what I need...my only problem is I want the power to all of my "stuff" cut off when the key is off... is there an easy patch for that?
This is ALMOST exactly what I need...my only problem is I want the power to all of my "stuff" cut off when the key is off... is there an easy patch for that?
Yes, you just add a relay on the main power coming into the fuse panel. Then use an add-a-circuit to switch it on with an ignition source.
This is ALMOST exactly what I need...my only problem is I want the power to all of my "stuff" cut off when the key is off... is there an easy patch for that?
Looks great. One thing though, I am an electrician and if you are going to go with a 60 amp fuse you should probably up grade to #6 awg wire which is good for about 50 amps. #10 awg wire is only rated for 30amps. more than likely it wont be an issue., but you know "what if"?
__________________
08' brick fully loaded minus off road package w/ daystar 2 1/2" leveling, 285/65rX18 Nitto Terra Grapplers on 18X9 KMC XD Diesels, dice ipod mod. Aux marine fuse block. rack mounted rear floods.
"Life is a full contact, participation sport. Get in there and play " 
J+J+FJ - '08 Titanium MT6 - Not stock, pinstriped paintjob. 
Linear Mode
