I was disappointed with the FJ horn so I called the Toyota dealership parts guy and this is what I found out.
An optional horn plug is located in the wiring harness under the hood that runs along the right wheel well. If you peel back the black covering on the harness you will see it. You will bolt the second horn to the smaller threaded area on the wheel well.
Brian "the parts guy" actually located the plug, plugged in the new horn, bolted the new optional Tundra horn to the inside of the wheel well (to ground it) and what a huge improvement over the single stock beep beep road runner horn. (You leave the original horn in place, do not remove or unplug it.)
Remember, your buying another horn from Toyota and adding it to the existing circuit at the wheel well harness. Pretty slick, however, I don't think you should have to pay for an addtional horn kinda blows no pun intended.
Guess thats the way it is.
The great thing about it is that it was a Toyota OEM part and plug and play. All is well the horn caper is resolved. Hope this helps anyone wishing to upgrade their FJ horn, it makes a big difference.
__________________ 07 FJ, SUN FUSION- 4x4 AT-Loaded, TOYTEC 3" Lift, BFG AT 285/70/17's, Romik Brush Guard, PIAA 540 DRL, xm.
Give me a break, there is not a much simpler install than what I described in more written detail than I would hope anyone would need. LOL! Sorry no pics for this one.
__________________ 07 FJ, SUN FUSION- 4x4 AT-Loaded, TOYTEC 3" Lift, BFG AT 285/70/17's, Romik Brush Guard, PIAA 540 DRL, xm.
Give me a break, there is not a much simpler install than what I described in more written detail than I would hope anyone would need. LOL! Sorry no pics for this one.
Don't be lazy...bust out the camera and take some pics or you will be sacrificed immediately!
Yes, a picture is worth a thousand words.
It would be nice to see which wire to connect to, and the part # for the Tundra horn, as I am sure there have been a few models by now since the introduction of the Tundra.
I was going to buy two Nappa (Fiaam) Freeway Blasters for the FJC when it gets here.
Running 2 of them in my '91 4Runner and they are loud.
But if this sounds nice and loud, I would try this setup instead.
__________________ Corey 2007 FJ Cruiser
ARB bumper, Warn XD9000, OME lift, snorked, penthouse, so much more, see my website & buildup thread
Sorry there Chatty, No B.S. on the wire its there you just have to LOOK where I explained the wire is located. Dude, calm down, take a zanex...pour a drink, relax, go for a drive or a walk. A little stressed are we?
Call Arlington Toyota, Jacksonville, Fla talk to Brian, its obvious this FJ horn minor quick fix is reeeeeally testing your skill level, Brian will assist you. He will walk you through it over the phone, fax you a diagram, or maybe fly out and perform the work for you if you ask nicely.
Just tell them that your the mighty Chatsworthless and you demand answers and demand them NOW. Dude you need to chill LMAO!
__________________ 07 FJ, SUN FUSION- 4x4 AT-Loaded, TOYTEC 3" Lift, BFG AT 285/70/17's, Romik Brush Guard, PIAA 540 DRL, xm.
well toyotas own horn diagram doidnt show a extra "plug" as u call it just a relay http://www.brockandbecca.com/files/f...orn%20diag.pdf
I sell tools to service guys and most arent in menza, Gee run another hot wire off the horn and ground it. Even a Hummer owner could figure that one.
Sorry I got your panties in a bunch for calling you out but dont flame me for it. Id tell people alot of stuff they dont like, in person, and online. Could care less If it bothers u, Im still gonna say it, Im sure alot of people wont like me @ the, so. cal. FJ meet. Dont really care.
__________________
Black Diamond 4x4 AT QC UR C7 V5 Z2, Low-Jack ,On 33" Nitto mud grappler, Fox Shox front, 3" Revtek lift rear, Pro-comp Xtreme Steel rims, PIAA Mirror lights, TRD Cold air intake, N-fab nerf bars, Road Armor Titan bumper with K.C. Rally 800-pencil beams/ PIAA 510 ION Fog lights, Manik tail light guards, Bushwacker fender flares and Black Diamond trim.
Linear Mode
