Has anyone taken out the center vents above the stereo? I reoved everything i could see and still can find what is holding them in place, If you have please let me know or send me a pm with directions pics or what ever you can tell me that will help thanks ahead of time
Has anyone taken out the center vents above the stereo? I reoved everything i could see and still can find what is holding them in place, If you have please let me know or send me a pm with directions pics or what ever you can tell me that will help thanks ahead of time
Pardon me for asking but what mad scientist project are you working on my friend?
You are Plum Crazy...I'll take cool air blowing on my face any day over bleeding ears. But hey, maybe you're not as interested in hearing people once you hit 65.
__________________
'63 Corvette Split-Window (5 spd MT)
'67 GTO (4 spd MT)
'72 K5 Blazer (Malibu (aka 'Chevy Voodoo') Blue/White Top, 4 spd MT w/ Granny Low)
'04 Mazda3 Hatchback (wife's, 5 spd MT)
'07 FJC (Voodoo Blue/6 spd MT)
Recently Sold (Gone But Not Forgotten):
'97 Viper GTS (Blue/white stripes, 6 spd MT)
'71 Bronco (4 spd MT w/ Granny Low)
'65 Mustang Fastback (4 spd MT)
YES...My left foot gets sad if it doesn't have a clutch pedal near by...
__________________
'63 Corvette Split-Window (5 spd MT)
'67 GTO (4 spd MT)
'72 K5 Blazer (Malibu (aka 'Chevy Voodoo') Blue/White Top, 4 spd MT w/ Granny Low)
'04 Mazda3 Hatchback (wife's, 5 spd MT)
'07 FJC (Voodoo Blue/6 spd MT)
Recently Sold (Gone But Not Forgotten):
'97 Viper GTS (Blue/white stripes, 6 spd MT)
'71 Bronco (4 spd MT w/ Granny Low)
'65 Mustang Fastback (4 spd MT)
YES...My left foot gets sad if it doesn't have a clutch pedal near by...
The plastic mount that holds the center vents in has a lip on the top right and left that goes under the dash, looks like you'd have to remove the plastic over the glove box and around the drivers gauges, kind of dumb setup.
The plastic mount that holds the center vents in has a lip on the top right and left that goes under the dash, looks like you'd have to remove the plastic over the glove box and around the drivers gauges, kind of dumb setup.
Sorry to say, the vents are part of the dash assembly. Found out this way
Dash - Smash... who needs a dash. I like the last picture of the inside just the way it is. Infact driving around that way will lessen the chance of the truck getting stollen. Now, if I can only remember where that #10x3/4" screw goes.
Linear Mode
