Doug from ToyTec Lifts and I just installed their new coilovers on my FJ. Go to the Group Buy section for details. ToyTec adjustable Coilovers Group buy - NEW!
I will be testing them out in Moab this weekend. More pictures and info to come after I get back.
__________________
TLCA#16292 Toytec custom coil lift,SS brake lines. PM me for Discountshttp://www.toyteclifts.com/fjcruiser...ruiserliftkits All Phase Offroad diff skid,engine skid,Hi-Lift mount,axe/shovel mount,HD LCA frame mounts. Spidertrax spacers. All-Pro HD LCA's,Bandi mount. FabFours front bumper w/PIAA lights
Stock Toyota steel wheels with 35" MTZ's.Gas/water cans mounted to stock rack. Midland hand-held CB. Thule fairing. OEM rock rails. A-Trac/Locker hack.
__________________ 2007 Silver Ti FJC, AT, Pre-Runner /Gibson catback pipes and tip/ Flowmaster 40 Series/Airaid Intake/RC 3" Lift /Home fabricated Airdam/Cobra 19 DX IV and Bandi mount (Semi Big Bill Set Up)/Black Steelies/Hella 500 Lights mounted on OEM front bumper/Some decals…started a collection/Gobi Ladder/ Demello Jack Clamps/Demello tube sliders/Hi Lift jack & Daystar jack isolator/285/70/17 BF Goodrich AT KO
Thanks for the feed back guys. I will be doing some testing in Moab with them. First impression on the street is that they are similar to OME medium (885). With the big benefit of being able to fine tune them for added weight of a bumper or if you have the driver side lean. Mine are adjusted at 3" lift and the stock A-arms don't contact the coil as they did with the OME coils. They also have thick aluminum top plates ready to install. No need for a spring compressor. That makes it a DIY install. I will add more pics after this weekend. Definitely another great option for the FJ.
__________________
TLCA#16292 Toytec custom coil lift,SS brake lines. PM me for Discountshttp://www.toyteclifts.com/fjcruiser...ruiserliftkits All Phase Offroad diff skid,engine skid,Hi-Lift mount,axe/shovel mount,HD LCA frame mounts. Spidertrax spacers. All-Pro HD LCA's,Bandi mount. FabFours front bumper w/PIAA lights
Stock Toyota steel wheels with 35" MTZ's.Gas/water cans mounted to stock rack. Midland hand-held CB. Thule fairing. OEM rock rails. A-Trac/Locker hack.
Yeah I saw those last week when I went over to get my lift on his 4 Runner, showing them to me as if I could afford it
What I am interested in are the LCA guards, especially after watching Eric bash the other one this weekend at China Wall.
Looks like that spare you sent with me is going to come in handy for him.
__________________ 08 Brick 4X4 AT
OME 3" Lift - BFG ATs - Bud Built Skids - Demello Front Bumper - Warn M8000 Winch w/ AmSteel Blue Line - Hella Lights, Roof and Bumper - The Box v.RMH - White out mirrors, door handles and rear bumper
New ToyTec adjustable Coilovers
2007 Silver Ti FJC, AT, Pre-Runner 
Linear Mode
