Best Belt-Driven Air Compressor for the Garage

BoxOnWheels · 05-05-2009, 12:45 PM

As the extent of vehicle-based projects and maintenance goes up, I'm giving serious consideration to purchasing an air compressor for the garage. I've spent several days now researching the options available and I've narrowed my selection down to two possible choices (model numbers below). But before I make the final plunge, I'm wondering if anyone has any other recommendations based on their own experiences. The only real stipulation I have is that I'm looking for an oil-lubricated, belt-driven compressor.

I plan to use this primarily for installing and removing car parts so the impact wrench will be getting the most use. I don't currently have a need for the higher demand tools (CFM-wise) but I'd like to get something that will support future needs as well. Price is also a consideration since I'm not looking to break the bank. But I don't mind spending a little more up front to ensure I'm getting something that will last. Would also prefer something portable but that's not a requirement.

Recommendations? Are the above two units a good buy for the money? Are there better more reliable brands than Ingersoll Rand?

Thanks in advance,

Jeff

RIVER RAT · 05-05-2009, 08:38 PM

Neither one of these really puts out much air.With air tools, and the other stuff you usually get into once you have air, you might want to go with something bigger.But that will put you into stationary units; nothing with wheels. Check out the Quincy site. They make real nice stuff.

BoxOnWheels · 05-09-2009, 06:33 PM

Quote:

RIVER RAT previously said:

Neither one of these really puts out much air.With air tools, and the other stuff you usually get into once you have air, you might want to go with something bigger.But that will put you into stationary units; nothing with wheels. Check out the Quincy site. They make real nice stuff.

I took a look at Quincy's products, which do look really good. I can't seem to find a lot of details about them though. Specs on individual models seemed to be in ranges, and I couldn't find any prices. Do they have any 110v models in the 6-10CFM range for under $1000?

Reason I ask is I have a friend with an older model Craftsman compressor that's 110v and puts out 9CFM. Is there anything like this available today? I'd prefer not to have to wire in a 220v outlet if I can get close to 10CFM out of a 110v model. Anyone have any ideas?

Thanks again,

Jeff