Pro Comp Wheel Help

Crotch Crickets · 04-25-2008, 07:12 PM

I currently have a 2.5 Sway away lift and 1.25 spidertrax wheel spacers. I am interested in getting these rims in a 17 and curious as to back spacing and a recommended tire size. Also no chop currently but will strongly be considering it to go bigger.

Any help is greatly appreciated. Also my current tire is stock size Mickey T's MTZ's and will be looking into going to the Pro comp extremeMT

**slither** · 04-25-2008, 07:32 PM

This is probably the part number I would research. I'm not sure about the center bore, they didn't have anything posted.

8101-7983
17x9 6x5.5
-6.6mm
4.75" 2200lbs 29lbs

I pulled this off the ProComp website. They also have a 17 x 8 4.5 BS with no offset. That would probably be very close to working but I'm not sure.
Hope this helps.