Re: Wheel Bearing and dash lights
When a wheel bearing fails to the point it damages the cv shaft and steering knuckle, then the abs sensor is most likely destroyed, and the wiring likely stretched.
I had a wheel bearing fail and it ate the wheel speed sensor. The bearing was really bad, felt like the wheel was going to fall off and I should have had it towed, but I thought I could make it 3mi home. I made it, but at the added cost of a wheel speed sensor
BTW, the "hall" ring is built into the wheel bearing, so, new bearing means new hall ring, so that shouldn't be a problem.
2008 Sandstorm FJ
-Offroad pkg, trail gear sliders, 35x12.5x17 Nitto Trail Grappler on 17x9 Level 8 Bully Pro, Icon 2.5 Ext. Travel Coilovers, Light Racing UCA, MetalTech Long Travel Rear w/ Icon 2.5 remote res , EM rear UCA, MetalTech rear LCA, Icon panhard bar, 1/2" Bandi lift, Man-a-fre skids, TC A-arm skids, FJToyman shock skids, CB w/ Bandi mount, AFE HT exhaust, Demello front bumper, Warn M8000 w/ synthetic, 4.56 Gears, ARB locker, Safari Snorkel