Join Date: Feb 2010
Location: Stokesdale, North Carolina
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Re: Tapping for Aux lights with DRL's?
I'll assume you're wiring directly. If I recall, the IPF relay has four wires: Yellow, White, Black and Black/White
The yellow should go to the battery
The white should go to the IPF lights
Assuming you're tapping in to the driver's side headlight, the Black wire should go to the light blue wire going into the headlight harness
Assuming the same, the Black/White wire should go to the Red/Light Blue going into the headlight harness.
Basically the two black wires will switch the relay to allow power to flow from the yellow wire to the white wire and you'll have IPF lighting when the high beams come on.
If I've got the colors wrong, let me know and I'll revise.
Black 07 6MT Blacked out including
Speedrye front bumper
, Ricochet under, stock rear
Lighting by TRS, Rigid, Baja Designs & a Chinese sweatshop
Audio by JVC, Infinity, Alpine, Boston, MB Quart
17x9 Liquid Metal Gatlins in black wrapped in Kumho 315/70-17 MT's
Toyota Rock Rails, Toyoutfitters links, URD shifter, Engo 12K synthetic
Toytec/Bilstein/OME suspension lift
Light Racing UCAs and a 4crawler 1.25" body lift
Uniden Pro520XL CB w/ 3' Firestiks up front