Toyota FJ Cruiser Forum banner

WTB: spanner/wrench for ICON coilovers

999 views 11 replies 8 participants last post by  Wilderness Joe 
#1 ·
Anyone out there have a spanner to sell? Please provide a pic.

Thanks!
 
#2 ·
#6 ·
I just ordered one. It's bull××it that a kit doesn't come with one.

Sent from my AT100 using AutoGuide App
 
#8 ·
Agreed.

An AR15 spanner wrench looks mighty close ...
 
#7 ·
Is there something particular about Icon's wrench? Is there a reason another spanner wrench of appropriate size wouldn't work?
 
#10 ·
Any spanner wrench with the appropriate sized pin will work. And a steel punch can be used as well.

Basically, if it fits in the hole, and you can get enough leverage to turn it without distorting or damaging the hole, you're good...:bigthumb:
 
#11 ·
WJ,
Grainger has them, and they should have (did in SoTulsa, so I'd assume Big D) an "adjustable", which is merely a pivot point on the center of the span. I found it easier to use inside the coil tower, working around resi hoses on the Radflo's, which aren't drilled for a pin.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top