Toyota FJ Cruiser Forum banner

Spacers for 305/70/R16 ?

2K views 3 replies 3 participants last post by  FJ_Gurl 
#1 ·
Just mounted up some Fierce Attitude M/T tires on my stock TRD wheels (2010 TT). They look awesome, and perform great in mud/dirt. However, they do rub slightly at full lock, pushing into the UCA just a bit.

Any suggestions for spacer size, and if not - tips for figuring out spacer size?

TIA!
 
#2 ·
My wife has the exact tire & wheel and had the same problem. The spacers will fix the UCA rub but will create another...body mount rub. We went with 1 1/4" Spidertrax spacers and then had the body mounts chopped. Zero issues now.

Another option is to go with an aftermarket UCA to avoid spacers and the chop.
 
#3 ·
Thanks! Should have mentioned, body mounts are already chopped, so that _hopefully_ shouldn't be an issue. Will look at the 1 1/4" Spidertrax...

May be doing some suspension work on the FJ later this year, so maybe will look into spacers / different setup on the UCA at that time.
 
#4 ·
i got Spidertrax spacers for my nitto tires too,, and they r good now..
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top