Toyota FJ Cruiser Forum banner
Showcase cover image for The Big Girl

General Information

FJ Cruiser - Bullet - Rotrex Supercharged
Vanilla white
The Lot
Purchased brand new in September 2013 (Built date July 2013 - Australian model), first owner.
2013 Toyota FJ Cruiser - Bullet - Rotrex Supercharged (Vanilla white)


4.0 Liter V6 Petrol engine
Bullet (Rotrex C38-81) Supercharger with oil cooler and filter, custom water to air Intercooler with separate fan and controller (with ON/OFF thermos switch), GFB blow off valve and 6x larger fuel injectors – Fully Engineered
Bullet custom air cleaner / intake (to fit Snorkel and second Battery) – Fully Engineered
- To fit standard BMC air filter
Bullet active bonnet hood
RaceWorks – Performance High Flow In-Tank fuel pump (265 LPH)
Bullet (custom) Oil Catch Can with SpeedFlow performance hoses and fittings
Brisk – Silver Racing Spark Plugs
Exhaust - Banks Power 3 inch stainless steel with Banks Monster ceramic packed muffler, custom designed performance Y-Pipe, the full system from the extractors back is CermaKrome coated (silver).
Custom designed long tube extractors Cerakote coated (black)
XEDE computer with switch 2 fuel mappings (normal 98 Oct. and outback), with bypass loom (if required)
Water – Methanol Injection System (DewilsOwn)
Custom tune
Electronic throttle controller (5 modes)
ScanGauge II
Transmission upgrade (Extreme Valve Body)
Transmission oil cooler connected via the Intercooler
Torque Lockup converter (with custom on/off switch)
Front ARB Air-Locker (with custom on/off switch
Rear factory E-Locker
Crawl control
Diff Breather Kit extended under bonnet (5 extensions) – Front & rear diff, rear diff lock, transmission and transfer case
Re-geared from 3.72 to 4.56 Diff gearing using Nitro gears
JBT 6 piston (Titanium) front brake calipers with DBA T3 diameter 338 mm slotted rotors and stainless steel braided brake lines with EBC Greenstuff 4wd brake pads – Fully Engineered
DBA T2 slotted rotors with EBC Greenstuff brake pads rear – Fully Engineered

Under the bonnet as well:
ARB Air Compressor under bonnet – Air fitting on front bar (with custom on/off switch)
Dual Battery system - Bosch Battery
Redarc BCDC Charger with automatic Solar Changeover Relay
Electronic Rust protection
UHF GME TX3540 incl. GME Antenna on front bar
Iridium Extreme Sat-Phone with Drive dock extreme and Beam antenna on front bar
Built-in TPMS Tyre Pressure and Temperature monitoring system
Custom overhead roof console
Custom door pockets
Toyota neoprene seat covers with custom headrest and arm rest covers
Toyota A-Pillar Grab Handles (which are not fitted from factory in Australia)
LED interior light upgrade
SandGrabba Floor mats
Window Tint
2x Baintech Voltage meter (one in dash and one in the cargo area)
4x Power Sockets, 2x USB Sockets (rear cargo area)
Black Widow Top shelf and Dividing wall barrier with LED lights
Springtails Cargo Barrier with 6x Quick Fist mounts and LED lights
6x Quick Fist mounts on rear door and LED lights
Rear door table with LED lights and switch
Drifta Drawer system with DSS Fridge slide system and table
Drifta rear seat replacement shelf unit (full custom) with cooling box mounts (68 Litre cooling box)
Built-in Black Widow 50L Water tank incl. water pump and 2m hose (with on/off tap) and water level gauge
90L Flexi Tank (on top shelf if required)
Engel anniversary Fridge (with screw in Engle connector)
The drawers are always ready with grill, small gas bottles, Jetboil (water) cooker, plates and everything else required for an instant overnight stay.
ARB front winch bar
Front Camera (fix in front bar) with WiFi control unit and android app (with custom on/off switch)
Warn Winch XDC 9500lb (with steel cable)
Road Safety Recovery points front (2x) – Custom powder coated colour
ARB Front Fog Light kit (with custom on/off switch)
ARB LED park light and indicator lights.
ARB Intensity LED Driving Light (Spot and Flood) –Custom colour bezel (with custom on/off switch)
ARB hinged number plate bracket
ARB Full under Vehicle protection
ARB side Rocker Rails and Slider Rocker Rails Plates under the car
Kaymar Rear Bar with twin carrier and LED rear lights (with parking sensors and reverse camera) incl. towbar and custom powder coated checker plate
1 spare and 1 twin Jerry can + 2 second spare wheel carrier to swap
Kaymar Rear telescopic LED camp light (with custom on/off switch)
Rear custom number plate mounting bracket and LED light
Bushranger Recovery Hitch rear
Kaymar High Lift Jack mount
High Lift Jack Extreme with High Lift Jack base
Maxtrax mount – Custom / Rhino bars on Kaymar Jerry can carrier
Black Maxtrax (4x)
Maxtrax mounting for spare wheel (if no second carrier is on the car)
Safari Snorkel with UNI Filter(s)
120 Litres LRA main fuel tank upgrade (+ 87 Litres factory rear tank = 207 Litres) – Fully Engineered
ARB roof rails
Rhino Heavy duty crossbars (6x)
Rhino Aero bar with wind fairing and custom decal
Korr 120W (10W Cree LED) light bar on Aero roof bar (with custom switch)
100W Solar Panel permanent on roof rack
Space Case
CS Project extra wide fender flares (Japan)
Bushranger extra wide mud flaps
Black Widow Sand Flag with quick connection on front bar
Blacked out front grill
Black side mirror covers (top) and white side mirror covers (bottom part)
White door handle covers
Clear side indicators with LED bulbs
Smoked Black LED front corner indicators from Mars Performance
Smoked Black LED Tail lights with LED reverse light bulb upgrade from Mars Performance
HID (fast start) headlight conversion kit 55W
Added Headlight washer nozzles onto the Bull bar using the rear window water connection all with no return valve to keep the HID conversion legal on road.
LED Park light upgrade
Toyota side window wind deflectors
Thule 963 Pro Spare Me Bike carrier
Rhino Shovel holders with lock
Bushranger Diggar shovel
Tough Toys LED side Awning (2.5x3m incl. dimmer and Mozzie Net)
Tough Toys LED rear Awning (1.4x2m incl. dimmer and Rear Tent)
Tough Toys Awning wall for large awning
Tough Toys Awning triangle fill in piece
2.2m PVC storage pipe with screw on end caps
Maggiolina Extreme medium Roof Top Tent with Thule Bars and custom LED lights and Maxtrax holder
100W iTechWorld Airflex Solar Panel mounted on Roof Top Tent
Maggiolina Changing Room and Awning
Custom Decals (on Bonnet, Rear door, above windscreen and both sides)
MSA 4x4 Rear Wheel Bag (2x)
MSA 4x4 Water Bra
Alpine INE-W957A Head unit with steering wheel control harness
Alpine 6x9 R series door speakers
Alpine 4 inch S series dash speakers
Dynamat in all doors including Focal sound proofing
Steelie mounts for 10.1 Android Tablet running HEMA maps
Steelie mount for Smartphone
GoPro Hero3+ with 3 mounting options (second battery, water proof housing and remote control and android app)
Old Man Emu BP-51 suspension (rear constant springs), shocks are fully adjustable for compression and rebound (remote reservoirs).
The rear is about 2.5 inch higher than factory but also a bit adjustable with the Airbags and
The front is a classic but true 2 inch lift with no diff drop at this stage, spring force and ride height can be adjusted.
I also have a full set OME Sport Nitro charger (front heavy springs incl. spacer) – used as spare for long remote touring which was the first suspension in the FJ Cruiser before BP-51 was available.
Front Sway Bar relocation kit (OME)
Front lower control arm SuperPro Offset Bushes
Airbag Man with Kevlar sleeves rear with air connections on rear bar (LH and RH)
Todd Selby (Signature Swaybar) Custom Heavy Duty Sway Bar front
ICON – Tubular upper control arm kit with ICON dust cap set
ICON – Rear adjustable pan rod bar
Timbrens front Bump stops
Heavy duty front sway bar links (All-Pro Off-Road)
Heavy duty extended rear sway bar links (Summit Racing)
All-Pro Off-Road – Rear adjustable lower control arms
All-Pro Off-Road – Rear adjustable upper arm links
All-Pro Off-Road – Rear lower control arm skid
All-Pro Off-Road – Front lower control arm skid
All-Pro Off-Road – E-Locker protection housing
All-Pro Off-Road – Low profile socket hex diff drain plug
All-Pro Off-Road – Rear Diff Housing protection plate – To be fitted
ICON – Front lower control arm skid plate kit
Wheel stud upgrade to ARP high tensile strength studs
Front Body mount modification
Bud Customs Spindle Gussets
Wheel and Tire
6x Nitto Trail Grappler M/T 295/70/17 on 6x Dynamic steel wheels 17 x 9 offset -30 (with TPMS)
5x Cooper LTZ 305/50/20 on
5x FUEL ANZA D557 wheels 20 x 10 offset -18 (with TPMS) and custom black wheel nuts



There are no comments to display.