Toyota FJ Cruiser Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Suspension / Steering Tech
    Hello everybody, I have my fj 2007 with a lit ARB and 35s tires, and the upper control arm are hitting coilovers, I have all upper control arms old man emu and shocks too, what I have to do? is an alignment problem? please help me!! I am getting crazy with that!!! thanks!!! oginal UCA NEW...
  2. Suspension / Steering Tech
    Had to have my steering rack replaced due to some issue I was having. Got it back and noticed the turning radius when turning left was a lot worse than it was originally. Then I noticed that at full lock when turning right is 1.75 turns of the wheel and full lock for left is 1.25 turns. So I...
  3. Newbie Discussions
    Hello all, I’m new to this forum and would like some advice on what I am possibly hearing. I have a 2007 2x4 auto and when lightly accelerating on the gas around 1400-1600 rpm’s the rear will begin to vibrate. It goes away as soon as I let go of the gas. Doesn’t matter if it’s at high speeds or...
  4. Suspension / Steering Tech
    Hello, first time post. I have a 2011 fj, I have been upgrading the suspension (OME 3" lift, SPC UCAs) I am running into the issue of alignment, I took it in to get aligned and they can't due to the LCA cam bolts being frozen so they need to cut them off. I've taken it to two places so I know...
  5. Suspension / Steering Tech
    Truck was recently lifted. Was hearing a singular click when backing up with the wheel cut so I figured a bolt may need to be torqued down. Another thread mentioned the LCA hardware is sometimes left loose after a shop does an alignment so I tightened that to spec. The specific nut I tightened...
  6. Suspension / Steering Tech
    Hi guys, I wanted to get your feedback on whether this is worth getting from Pep Boys. They have a lifetime alignment normally $179.99, but there is a coupon for $30.00 off making it $149.99. I go off roading about once a month and definitely go over a lot of rocks, deep holes, waterfalls...
  7. Suspension / Steering Tech
    I just got Bilstein 6112s up front and 5100s on the rear. Good shop - guys know what they are doing. However, it pulls right no matter what. They have aligned it 2 times but still can't seem to get it to drive straight. I was hoping someone might know some other areas to check to fix it...
  8. Suspension / Steering Tech
    Hey Everyone. Over the weekend I installed SPC upper control arms as well as disassembled all of the lower control arm adjustment bolts to coat them with anti seize (only the front driver side was seized). Yesterday I went in for an alignment and everything seems to have lined up pretty nicely...
  9. Maintenance Tech
    So I just got the FJ lifted and when the shop went to realign the wheels, they couldn't break the cam bolt loose because it had rusted in place. They say if they break the bolt head off, I'll have to pay over $1000 in new cam bolts and replacing the lower control arms. Anyone know a good way to...
  10. Suspension / Steering Tech
    Hello! I am new to this forum and this is my first post. I recently purchased a 2010 4x4 FJ Cruiser with side impact damage. The wheels are badly aligned and have a big negative chamber. I took it to get aligned, and they said it needed a new front passenger side lower control arm. :crying...
  11. Wheels and Tires
    About 2 years ago after an accident with my FJ (falling asleep behind the wheel) I searched for and found some alignment specs in this forum that I printed out and gave to the repair shop after they were done replacing the entire right suspension. It has handled great since, but Im replacing the...
1-11 of 11 Results
Top