Toyota FJ Cruiser Forum banner

21 - 21 of 21 Posts

Mean Time Moderator
5,570 Posts
Discussion Starter #21

Connected and working as intended. I can now run my S2’s either as aux lights on the Switch Pro circuit enabling me to strobe and flash too or I can switch over the circuit and run them to power on with main beam.

I had the right wiring in the first place. What confused me and made me doubt was that I read to many threads about doing this, different wire colour (most say to connect to the blue wire with red tracer) many say they are neg switched etc etc.

So for a 2014 at least this works:

Relay wired ‘conventionally’ with the trigger taken from the hi beam sire on the left headlight which is red wire with blue tracer.

The aux lights come on with main beam, go off otherwise. I do not run with DRL’s on but can confirm that they do not come on with DRL on.
21 - 21 of 21 Posts