Toyota FJ Cruiser Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
677 Posts
Look in your wheel wells! There is a hump there that needs to be removed to allow for bigger tyres/no rubbing! Once the hump is cut off a plate needs to be welded in to seal the offending hole!
 

·
Premium Member
Joined
·
4,294 Posts
It is the rear front body mounts...that does not make since does it?

Look at the front tires and the mounts towards the back of the wheel well are the ones you need to chop. There is a plastic cover that you will need to remove to get to them.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top