Toyota FJ Cruiser Forum banner
1 - 2 of 6 Posts

· Registered
Joined
·
6,549 Posts
If you go with the factory switch the easiest way is to purchase the pigtail with the plug that matches the switch and then just splice the harness that came with your lights into that pigtail.

There are many switches out there that look great and "almost factory" and at a great deal less $ than the factory switches. Check out the thread below for several different switch options.

http://www.fjcruiserforums.com/foru...3-switches-compilation-panel-switches-fj.html
 

· Registered
Joined
·
6,549 Posts
Which is the root of my question. Does the pigtail sold at Sparks Toyota site match with both types of switches. There is an offraod light switch and an aux switch, but only one pigtail to buy. Does it match both types of switch?
I cant tell you for sure, but my thought is that both switches are the same except for the graphic on the switch itself. They both do the same function so logically I would think they are the same internally, call sparks and ask them if the pigtail fit both.
 
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top